Tube - Square - ZTE - Unidirectional - High Modulus - 2.00 x 2.150 x 66 Inch [BUILT TO ORDER]
P/N
25513-ZTE-HM
Built To Order ◾ Lead times are usually 2 weeks ◾ High quantities may have an increased lead time
- 1 $1,257.99
- 2-4 $1,049.79
- 5-9 $933.59
- 10+ $810.39
Features & Benefits
- Low CTE
- Lightweight
- High Modulus Fiber
- Newport 321 Resins System (NASA approved for outgassing)
- High Stiffness
Additional Information
P/N | 25513-ZTE-HM |
---|---|
Built To Order | Yes |
Inside Dimension | 2.000000 |
Outside Dimension | 2.150000 |
Thickness | 0.000000 |
Application | Low CTE |
Materials | High Modulus Carbon |
WT. | 2.400000 |
Inner Diameter (long) | 2 |
Outer Diameter (short) | 2.150 |
Outer Diameter (Flat to Flat) | 2.150 |
Shape | Square |
Space Flight Ready | No |
Traceability Included | No |
Surface Finish (exterior) | Sanded Smooth |
Wall Thickness | .075 |
Length | 66 |
Technical Data
We offer two tube products to choose from: -P engineered to have a slightly positive CTE, and -N engineered to have a slightly negative CTE.
Typical Values | -P | -N |
Elongation (ppm/°F) | 0.04 | -0.05 |
Twist (Arcsec/ft./°F) | ±0.10 | ±0.15 |
Bend (Arcsec/ft./°F) | ±0.08 | ±0.08 |
Modulus (MSI) | 21 | 21 |
*Note: CTE values listed here are on average 20x lower than typical carbon fiber laminates!
Available on request
- CTE Testing
- Custom Sizes
ZTE Tubing Data Sheet
Layup Orientation
SKU : 25513-ZTE-HM |
||
Ply # | Orientation | Location |
1 | proprietary | Inside |
- 0° Fibers maximize bending stiffness. Consider bending the tube over your knee.
- 45° Fibers maximize torsional stiffness. Typically plied together in an opposing manner, i.e. ±45°. Consider twisting the tube like a vehicle's driveshaft.
- 90° Fibers maximize crushing stiffness and generally assist in overall tube strength. Consider laying the tube on the ground and stepping on it.
Request A Quote