Tube - Filament Wound - HS40 Torque Layup - Unsanded - 0.75 x ~0.95 x 12 inch - Sold by the foot - Available up to 96 Inches
P/N
35024-HM-U
0.750" ID Filament Wound Tube ◾ Unsanded Finish ◾ Long Lengths Available off the Shelf ◾ High Modulus Carbon Fiber
- 1-7 $69.99
- 8-23 $58.79
- 24-95 $54.59
- 96+ $47.39
Features & Benefits
Carbon Fiber Material | Modulus, Strength | Benefits, Features & Notes
- Standard Modulus | 34 msi, 700 ksi | Good structural properties - Stiffer than aluminum - Readily available
- Intermediate Modulus | 42 msi, 825 ksi | Great structural properties - Highest strength option - Great balance of stiffness and strength
- High Modulus | 57 msi, 670 ksi | Very stiff - Good thermal conductivity / stability - Typically used in all 0° & 90° (or off-axis) plies throughout the ply sequence / laminate orientation.
- Ultra High Modulus | 94 msi, 414 ksi | Stiffest option available - Great thermal conductivity - Used primarily as 0° plies in combination with lower modulus / higher strength fibers in the 90° orientation to create a well-balanced and functional composite structure.
*Values listed above are reflective only of the fiber NOT the composite matrix (fiber + resin) and are listed only for tensile modulus and strength. ***Theoretical values are currently not available for this tube but testing can be performed upon request for a fee
Additional Information
P/N | 35024-HM-U |
---|---|
Space Flight Ready | No |
Traceability Included | No |
Inside Dimension | 0.750000 |
Outside Dimension | 0.950000 |
OD | 0.950000 |
Wall | 0.100000 |
Length | 12 |
WT. | 0.170000 |
Materials | High Modulus Carbon |
HTS - Harmonized Tariff Code | 6815.13.0000 |
Surface Finish (exterior) | As Wound / Unsanded |
Technical Data
We cannot supply theoretical values for this tube at this time. For specification sheets and other data we can supply please review our Technical Spec page.
Layup Orientation
We cannot supply any layup details for the filament wound tubing at this time.
Request A Quote