Tube - Round - INFINITubeTW - Ultra High Modulus - 1k Plain Weave - Size 07 - 1.625 x 1.730 X 72.0 IN
P/N
45007-UHM
Ultra High Modulus ◾ Gloss Finish ◾ 1K Plain Weave Pattern ◾ Highest Available Stiffness ◾ Built with 94 MSI Carbon Fiber in the Zero degree orientation
- 1 $608.99
- 2-4 $464.79
- 5-9 $381.59
- 10+ $310.39
Features & Benefits
Fabric roll wrapped tubing offers many benefits over uni-directional and even filament wound tubing. That isn't to say it is the best however. Here are a few reasons you may wish to consider fabric roll wrapped tubing for your application.
- Superior machine ability
- Much better durability by reducing the potential extent of fiber breakout if drilled, machined or damaged
- Typical aesthetic associated with carbon fiber products
- Most "fabric" tubes contain a majority 0° plies in the layup allowing for the most effective bending load support. (whereas filament wound tubes cannot achieve angles less than ~7°
Additional Information
P/N | 45007-UHM |
---|---|
Built To Order | Yes |
Space Flight Ready | No |
Traceability Included | No |
Inside Dimension | 1.625000 |
Outside Dimension | 1.730000 |
OD | 1.730000 |
Wall | 0.052500 |
Length | 72 |
Tensile Modulus (Stiffness), msi | 34.080000 |
WT. | 1.180000 |
Materials | Ultra High Modulus Carbon |
HTS - Harmonized Tariff Code | 6815.13.0000 |
Telescoping Class | INFINITubeTW - Flip Lever Clamp |
Surface Finish (exterior) | Cello Wrap Gloss |
Technical Data
*Theoretical values are currently not available for this tube but testing can be performed upon request for a fee
Layup Orientation
SKU : 45007-UHM Rev NC |
||
Ply # | Orientation | Location |
1 | 90 | Inside |
2 | 90 | ↓ |
3 | 0 | |
4 | 0 | |
5 | 0 | |
6 | 0/90 | Outside |
- 0° Fibers maximize bending stiffness. Consider bending the tube over your knee.
- 45° Fibers maximize torsional stiffness. Typically plied together in an opposing manner, i.e. ±45°. Consider twisting the tube like a vehicle's driveshaft.
- 90° Fibers maximize crushing stiffness and generally assist in overall tube strength. Consider laying the tube on the ground and stepping on it.
Request A Quote