Tube - All Fabric - 0.553 x 0.593 x 72 Inch
P/N
45026
0.553" ID Carbon Fiber Tube ◾ 2x2 Twill On All Layers ◾ Gloss Finish ◾ Fabric Finish Provides An Ideal Machining Surface
- 1-9 $122.99
- 10-49 $108.79
- 50-99 $103.59
- 100+ $93.39
Features & Benefits
Fabric roll wrapped tubing offers many benefits over uni-directional and even filament wound tubing. That isn't to say it is the best however. Here are a few reasons you may wish to consider fabric roll wrapped tubing for your application.
- Superior machine ability
- Much better durability by reducing the potential extent of fiber breakout if drilled, machined or damaged
- Typical aesthetic associated with carbon fiber products
- Most "fabric" tubes contain a majority 0° plies in the layup allowing for the most effective bending load support. (whereas filament wound tubes cannot achieve angles less than ~7°
Additional Information
P/N | 45026 |
---|---|
Space Flight Ready | No |
Traceability Included | No |
Inside Dimension | 0.553000 |
Outside Dimension | 0.593000 |
Thickness | 0.000000 |
OD | 0.593000 |
Wall | 0.020000 |
Length | 72 |
Tensile Modulus (Stiffness), msi | 8.200000 |
WT. | 0.150000 |
Materials | Standard Modulus Carbon |
HTS - Harmonized Tariff Code | 6815.13.0000 |
Surface Finish (exterior) | Cello Wrap Gloss |
Technical Data
Theoretical Data |
||
SKU: 45026 Rev A |
||
Ftu-Lengthwise | 54 | ksi |
Tension Strength | 2.3 | k-lb |
Fcu-Lengthwise | 52 | ksi |
Compression Strength | 2.2 | k-lb |
Flexure Strength | 52 | ksi |
Internal Pressure | 0 | psi |
Tension Modulus | 9.1 | Msi |
Compression Modulus | 7.9 | Msi |
As Tested Data |
||
SKU: 45026 Rev A |
||
Ftu-Lengthwise | N/A | ksi |
Tension Strength | N/A | k-lb |
Fcu-Lengthwise | N/A | ksi |
Compression Strength | N/A | k-lb |
Flexure Strength | N/A | ksi |
Internal Pressure | N/A | psi |
Tension Modulus | N/A | Msi |
Compression Modulus | N/A | Msi |
*ALL data in this table provided as reference only. Rock West does not guarantee values presented herein and requires that physical testing & validation be performed by purchaser prior to product assembly or use.
Layup Orientation
SKU : 45026 Rev A |
||
Ply # | Orientation | Location |
1 | 0/90 | Inside |
2 | 0/90 | Outside |
- 0° Fibers maximize bending stiffness. Consider bending the tube over your knee.
- 45° Fibers maximize torsional stiffness. Typically plied together in an opposing manner, i.e. ±45°. Consider twisting the tube like a vehicle's driveshaft.
- 90° Fibers maximize crushing stiffness and generally assist in overall tube strength. Consider laying the tube on the ground and stepping on it.
Request A Quote