Tube - Fabric - 1.75 x 2.00 x 72 Inch
P/N
45111
1.75" ID Carbon Fiber Tube ◾ 2x2 Twill Pattern ◾ Gloss Finish ◾ Fabric Finish Provides An Ideal Machining Surface
- 1-5 $469.99
- 6-24 $430.79
- 25-49 $404.59
- 50+ $369.39
Features & Benefits
Fabric roll wrapped tubing offers many benefits over uni-directional and even filament wound tubing. That isn't to say it is the best however. Here are a few reasons you may wish to consider fabric roll wrapped tubing for your application.
- Superior machine ability
- Much better durability by reducing the potential extent of fiber breakout if drilled, machined or damaged
- Typical aesthetic associated with carbon fiber products
- Most "fabric" tubes contain a majority 0° plies in the layup allowing for the most effective bending load support. (whereas filament wound tubes cannot achieve angles less than ~7°
Additional Information
P/N | 45111 |
---|---|
Space Flight Ready | No |
Traceability Included | No |
Inside Dimension | 1.750000 |
Outside Dimension | 2.000000 |
OD | 2.000000 |
Wall | 0.125000 |
Length | 72 |
Tensile Modulus (Stiffness), msi | 11.130000 |
Max Operating Temp (Tg) | 238.000000 |
WT. | 3.000000 |
Materials | Standard Modulus Carbon |
HTS - Harmonized Tariff Code | 6815.13.0000 |
Surface Finish (exterior) | Cello Wrap Gloss |
Technical Data
Theoretical Data |
||
SKU: 45009 Rev D |
||
Ftu-Lengthwise | 126.9 | ksi |
Tension Strength | 87.9 | k-lb |
Fcu-Lengthwise | 79.2 | ksi |
Compression Strength | 54.9 | k-lb |
Flexure Strength | 79.2 | ksi |
Internal Pressure | 1260.0 | psi |
Tension Modulus | 12.6 | Msi |
Compression Modulus | 12.3 | Msi |
Avg. Tube Modulus | 12.4 | Msi |
Avg. Tube Modulus | 85.7 | Gpa |
As Tested Data |
||
SKU: 45009 Rev D |
||
Ftu-Lengthwise | N/A | ksi |
Tension Strength | N/A | k-lb |
Fcu-Lengthwise | N/A | ksi |
Compression Strength | N/A | k-lb |
Flexure Strength | N/A | ksi |
Internal Pressure | N/A | psi |
Tension Modulus | N/A | Msi |
Compression Modulus | N/A | Msi |
*ALL data in this table provided as reference only. Rock West does not guarantee values presented herein and requires that physical testing & validation be performed by purchaser prior to product assembly or use.
Layup Orientation
SKU : 45111 Rev A |
||
Ply # | Orientation | Location |
1 | 0 | Inside |
2 | 0 | ↓ |
3 | 0 | |
4 | 90 | |
5 | 90 | |
6 | 0 | |
7 | 0 | |
8 | 45 | |
9 | -45 | |
10 | 90 | |
11 | 90 | |
12 | 45 | |
13 | -45 | |
14 | 0 | |
15 | 0 | |
16 | 90 | |
17 | 90 | |
18 | 0 | |
19 | 0 | |
20 | 0/90 | Outside |
- 0° Fibers maximize bending stiffness. Consider bending the tube over your knee.
- 45° Fibers maximize torsional stiffness. Typically plied together in an opposing manner, i.e. ±45°. Consider twisting the tube like a vehicle's driveshaft.
- 90° Fibers maximize crushing stiffness and generally assist in overall tube strength. Consider laying the tube on the ground and stepping on it.
Request A Quote