TUBE - FABRIC - 0.437 X 0.507 X 96 INCH - Globally Sourced
P/N
45551-LONG-DL-BTO
Low Cost Carbon Fiber Tube ◾ Globally Sourced ◾ 4 to 10 Week Lead time
$46.99
Features & Benefits
Fabric roll wrapped tubing offers many benefits over uni-directional and even filament wound tubing. That isn't to say it is the best however. Here are a few reasons you may wish to consider fabric roll wrapped tubing for your application.
- Superior machine ability
- Much better durability by reducing the potential extent of fiber breakout if drilled, machined or damaged
- Typical aesthetic associated with carbon fiber products
- Most "fabric" tubes contain a majority 0° plies in the layup allowing for the most effective bending load support. (whereas filament wound tubes cannot achieve angles less than ~7°
Additional Information
P/N | 45551-LONG-DL-BTO |
---|---|
Built To Order | Yes |
Space Flight Ready | No |
Traceability Included | No |
Inside Dimension | 0.437000 |
Outside Dimension | 0.507000 |
OD | 0.507000 |
Wall | 0.035000 |
Length | 96 |
Tensile Modulus (Stiffness), msi | 11.070000 |
Max Operating Temp (Tg) | 238.000000 |
WT. | 0.280000 |
Materials | Standard Modulus Carbon |
HTS - Harmonized Tariff Code | 6815.13.0000 |
Surface Finish (exterior) | Cello Wrap Gloss |
Layup Orientation
SKU : 45551-LONG-DL-BTO Rev NC |
||
Ply # | Orientation | Location |
1 | 0 | Inside |
2 | 0 | ↓ |
3 | 0 | |
4 | 90 | |
5 | 0/90 | Outside |
- 0° Fibers maximize bending stiffness. Consider bending the tube over your knee.
- 45° Fibers maximize torsional stiffness. Typically plied together in an opposing manner, i.e. ±45°. Consider twisting the tube like a vehicle's driveshaft.
- 90° Fibers maximize crushing stiffness and generally assist in overall tube strength. Consider laying the tube on the ground and stepping on it.
Request A Quote