Rod - Pultruded Unidirectional - 0.098" - 2000ft Coil
Continuous Length & high strength pultrusion
Product Specifications
To cut carbon fiber we suggest a saw similar to a tile cutting saw with a diamond abrasive wheel. The use of water while cutting will keep the material cool as well as keep dust particles to a minimum. If you do not have a tile cutting saw then a Dremel motor with an abrasive cutting wheel will offer a fairly clean cut. You can also use a fine-toothed hacksaw as a final (but not ideal) option. Tape around area to be cut to prevent splintering or separation of carbon fibers. Wear eye protection and dust mask.
Additional Information
P/N | 47307-COIL |
---|---|
OD | 0.098000 |
WT. | 50.000000 |
Inside Dimension | 0.000000 |
Outside Dimension | 0.098000 |
Thickness | 0.000000 |
Application | Bending / Tension |
Length | 24000 |
Materials | Standard Modulus Carbon |
Shape | Round Rod |
Solid OD 1 (Flat to Flat) | 0.000" - 0.099" |
Built To Order | Yes |
RoHS | Compliant |
REACH | Compliant |
HTS - Harmonized Tariff Code | 6815.13.0000 |
USMCA Criterion | D |
ECCN | EAR99 |
Technical Data
Minimum Properties Solid Strip (Rectangle):
- Tensile Strength: 320 ksi / 2.34 GPa
- Compressive Strength: 270 ksi / 1.90 GPa
- Fiber Volume: 65%
- Matrix Material: Bisphenol Epoxy Vinyl Ester
Tolerances
Diameter Tolerance: +/- 0.007"