Prepreg - Carbon Fiber (HR40) - 39.37" Wide x 0.0034" Thick - High Modulus Unidirectional (134 gsm OAW) - Newport 321 Resin - Available by the 1/2 LB. & Full Roll

Sku: 14008-D-GROUP
Prepreg - Carbon Fiber (HR40) - 39.37" Wide x 0.0034" Thick - High Modulus Unidirectional (134 gsm OAW) - Newport 321 Resin - Available by the 1/2 LB. & Full Roll
Sku: 14008-D-GROUP
Efficient, Clean & Easy to Use - Full Rolls Available
$0.00 Tax Collected Outside CA and UT

Sales Tax

Rock West Composites only collects sales tax on orders shipped to addresses in the States of California & Utah. In California product & shipping amounts are taxed. In Utah only products are taxed.

You may be responsible for state and local sales/use taxes when filing your tax returns. Please check your local sales tax laws.

Prepreg - Carbon Fiber (HR40) - 39.37" Wide x 0.0034" Thick - High Modulus Unidirectional (134 gsm OAW) - Newport 321 Resin - Available by the 1/2 LB. & Full Roll
1/2 Lb. x Roll Width Increments ◾ Provided In Continuous Length ◾ Provided In Continuous Length
Sku: 14008-D
  • 1 to 2 $79.99
  • 3 to 4 $67.79
  • 5 to 9 $59.59
  • 10 to 24 $51.39
  • 25+ $43.79
Prepreg - Carbon Fiber (HR40) - 39.37" Wide x 0.0034" Thick - High Modulus Unidirectional (134 gsm OAW) - Newport 321 Resin - Available by the 1/2 LB. & Full Roll
Full Roll ◾ Approximately 65 Lb. Per Roll
Sku: 14008-D-FULLROLL
$5,440.99
Description

Details

HR40 High Modulus Carbon Fiber ◾ Newport 321 Epoxy Resin ◾ High Stiffness ◾ 0.0034" Thick

You can use our high modulus prepregs any number of ways including, but not limited to, autoclave, press, vacuum, and compaction tapes. Since most shops do not have access to an autoclave or heated press, the latter two options are mostly used for smaller operations. Due to this prepreg’s specific uni-directional fiber orientation and high modulus fibers, you would use this prepreg in designs that need increased strength and stiffness in one direction. The fiber gives you high performance -and high stiffness.

This Prepreg is sold by the half pound or the full roll. Common conversion for 1/2 pound of material is 39.37" wide x 66" long. If you order more than one unit the material will be provided in continuous format. If you order a full roll you will receive about ~81 lbs. and is the weight of the raw material and resin, does not include the weight of the backing paper or core. If ordering full rolls and you order 2+ rolls in the shopping cart, it will require additional shipping charges as each unit ordered is an individual box of prepreg.

Quick Facts For HR40 Unidirectional Prepreg

Values provided here may vary slightly

  • Fiber = 60% 80 gsm HR40 Fiber (or equivalent)
  • Roll Width = 39.37"
  • Resin System = 40% Newport 321 Epoxy Resin System
  • CPT (Cure Ply Thickness) = 0.0034"
  • Cure Temp = Between 250°F and 300°F
  • Out Life = 30 days at 70°F (21°C)
  • Shelf Life = 12 months at 0°F (-18°C)

Prepregs have special policies related to returns and shipping. Please review them here prior to order.

Additional Information

Additional Information

Units:
P/N 14008-D 14008-D-FULLROLL
Application Raw Material Raw Material
Materials High Modulus Carbon High Modulus Carbon
Pattern Unidirectional Unidirectional
WT.
Technical Data

HR40 High Modulus Carbon Or Equivalent Fiber Data Sheet

PDF Download

Newport 321 - Resin System Data Sheet

PDF Download

MSDS / SDS