Prepreg - Fiberglass Woven (120 Glass) - 38" Wide x 0.005" Thick - 40% Resin Content w/out pigment (185 gsm OAW) - 250F Resin - Sold by the Linear Foot & Full Roll

Sku: 14015-D-GROUP
Prepreg - Fiberglass Woven (120 Glass) - 38" Wide x 0.005" Thick - 40% Resin Content w/out pigment (185 gsm OAW) - 250F Resin - Sold by the Linear Foot & Full Roll
Sku: 14015-D-GROUP
Efficient, Clean & Easy to Use - Full Rolls Available
$0.00 Tax Collected Outside CA and UT

Sales Tax

Rock West Composites only collects sales tax on orders shipped to addresses in the States of California & Utah. In California product & shipping amounts are taxed. In Utah only products are taxed.

You may be responsible for state and local sales/use taxes when filing your tax returns. Please check your local sales tax laws.

Prepreg - Fiberglass Woven (120 Glass) - 38" Wide x 0.005" Thick - 40% Resin Content w/out pigment (185 gsm OAW) - 250F Resin - Sold by the Linear Foot & Full Roll
Linear Foot x Roll Width Increments ◾ Provided In Continuous Length
Sku: 14015-D
  • 1 to 1 $38.99
  • 2 to 4 $27.79
  • 5 to 9 $22.59
  • 10 to 49 $16.39
  • 50+ $13.19
Prepreg - Fiberglass Woven (120 Glass) - 38" Wide x 0.005" Thick - 40% Resin Content w/out pigment (185 gsm OAW) - 250F Resin - Sold by the Linear Foot & Full Roll
Full Roll ◾ ~239 Lft. ◾ ~760 Sqft
Sku: 14015-D-FULLROLL
  • 1 to 2 $2,629.89
  • 3 to 4 $2,299.69
  • 5+ $1,971.49
Description

Details

120 Glass Fiber (E-GLASS) ◾ Newport 301 Epoxy Resin ◾ Prevent Galvanic Corrosion ◾ 0.005" Thick

You can use our prepregs any number of ways including, but not limited to, autoclave, press, vacuum, and compaction tapes. Since most shops do not have access to an autoclave or heated press, the latter two options are mostly used for smaller operations. This Prepreg material is ideal for use as an isolative inner or outer ply on any project helping to prevent galvanic corrosion. At just 0.003" ply thickness, this woven scrim will also help eliminate "breakout" when drilling or machining your laminates. We use this material on the ID of all of our INFINITubeV tubes since most of these tubes will be drilled for button clips or locking pins of some kind.

This prepreg is sold by the foot or the full roll. Common conversion for 1 foot of material is 12" long x 38" wide = 3.167 square feet. If you order more than one unit the material will be provided in continuous format. If you order a full roll you will receive about ~239 linear feet. If ordering full rolls and you order 2+ rolls in the shopping cart, it will require additional shipping charges as each unit ordered is an individual box of prepreg.

Quick Facts For Woven Fiberglass Prepreg

Values provided here may vary slightly

  • Fiber = 60% E-Glass 105 GSM (or equivalent)
  • Roll Width = 38"
  • Resin System = 40% Newport 301 Epoxy Resin System
  • CPT (Cure Ply Thickness) = 0.005"
  • Cure Temp = Between 250°F and 300°F
  • Out Life = 30 days at 70°F (21°C)
  • Shelf Life = 12 months at 0°F (-18°C)

Prepregs have special policies related to returns and shipping. Please review them here prior to order.

Additional Information

Additional Information

Units:
P/N 14015-D 14015-D-FULLROLL
Application Raw Material Raw Material
Materials Fiberglass Fiberglass
Pattern Woven Woven
WT.
Technical Data

Newport 301 - Resin System & Material Data Sheet

Please refer to the section in this document that calls out 7781 E-Glass. The data will be similar for this material.

PDF Download

MSDS / SDS