25502 - Tube - Rectangle - Fabric - 0.625 x 1.25 - 0.73 x 1.35 - (+Length Options)

Sku: 25502-GROUP
25502 - Tube - Rectangle - Fabric - 0.625 x 1.25 - 0.73 x 1.35 - (+Length Options)
Sku: 25502-GROUP
Sharp inside corners
$0.00 Tax Collected Outside CA and UT

Sales Tax

Rock West Composites only collects sales tax on orders shipped to addresses in the States of California & Utah. In California product & shipping amounts are taxed. In Utah only products are taxed.

You may be responsible for state and local sales/use taxes when filing your tax returns. Please check your local sales tax laws.

25502 - Tube - Rectangle - Fabric - 0.625 x 1.25 - 0.73 x 1.35 - (+Length Options)
Tube - Rectangle - Fabric - 0.625 x 1.25 - 0.73 x 1.35 - 12 inch
Sku: 25502-L12
  • 1 to 9 $38.99
  • 10 to 49 $35.79
  • 50+ $33.59
25502 - Tube - Rectangle - Fabric - 0.625 x 1.25 - 0.73 x 1.35 - (+Length Options)
Tube - Rectangle - Fabric - 0.625 x 1.25 - 0.73 x 1.35 - 18 inch
Sku: 25502-L18
  • 1 to 9 $63.99
  • 10 to 49 $57.79
  • 50 to 99 $54.59
  • 100+ $49.39
25502 - Tube - Rectangle - Fabric - 0.625 x 1.25 - 0.73 x 1.35 - (+Length Options)
Tube - Rectangle - Fabric - 0.625 x 1.25 - 0.73 x 1.35 x 66 inch
Sku: 25502
  • 1 to 5 $152.99
  • 6 to 24 $137.79
  • 25 to 49 $130.59
  • 50+ $118.39
Description

Details

Benefits & Highlights;

  • Ideal for use in applications where mounting hardware is needed
  • Measurement is flat to flat. Straightness tolerance not called out

The following values obtained through non scrutinous radius gauge testing (Rock West will not be liable for discrepancy on radius callout);

  • Inner corner radius: TIGHT - Near 90 degree 
  • Outer corner radius: 0.125" (+/-0.05")
Additional Information

Additional Information

Units:
P/N 25502-L12 25502-L18 25502
Materials Standard Modulus Carbon Standard Modulus Carbon Standard Modulus Carbon
Shaped ID 1 (Flat to Flat)
Shaped ID 2 (Flat to Flat)
Shaped OD 1 (Flat to Flat)
Shaped OD 2 (Flat to Flat)
Shape Rectangular Rectangular Rectangular
Surface Finish (exterior) Cello Wrap Gloss Cello Wrap Gloss Cello Wrap Gloss
LG
WT.
Layup Orientation

 

SKU:  25502 Rev D

Ply # Orientation Location
1 30 Inside
2 -30
3 30
4 -30
5 90
6 30
7 -30
8 0/90 Outside
 
  • 0° Fibers maximize bending stiffness. Consider bending the tube over your knee.
  • 45° Fibers maximize torsional stiffness. Typically plied together in an opposing manner, i.e. ±45°. Consider twisting the tube like a vehicle's driveshaft.
  • 90° Fibers maximize crushing stiffness and generally assist in overall tube strength. Consider laying the tube on the ground and stepping on it.
Technical Data

Radius of Tubing

The inner and external corner radii are measured by hand with a radius gauge with no tolerance called out.
  • Internal Radius: 1/64”
  • External Radius: 5/32”.

We cannot supply theoretical values for this tube at this time. For specification sheets and other data we can supply please review our Technical Spec page.

Tolerances

STOCK TOLERANCE SHEET

PDF Download