Tube - Rectangle - Fabric - 2.0 x 4.0 - 2.5 x 4.6 x 105 inch
P/N
25511
2.0" x 4.0" ID Carbon Fiber Rectangle Tube ◾ 2x2 Twill Pattern ◾ Gloss Finish
- 1 $3,295.99
- 2-4 $2,966.79
- 5-9 $2,801.59
- 10+ $2,553.39
Features & Benefits
Fabric roll wrapped tubing offers many benefits over uni-directional and even filament wound tubing. That isn't to say it is the best however. Here are a few reasons you may wish to consider fabric roll wrapped tubing for your application.
- Superior machine ability
- Much better durability by reducing the potential extent of fiber breakout if drilled, machined or damaged
- Typical aesthetic associated with carbon fiber products
- Most "fabric" tubes contain a majority 0° plies in the layup allowing for the most effective bending load support. (whereas filament wound tubes cannot achieve angles less than ~7°
Additional Information
Application | Tooling Plates / Support Structures |
---|---|
Materials | Standard Modulus Carbon |
Pattern | 3k 2X2 Twill Weave |
WT. | 18.800000 |
Shaped ID 2 (Flat to Flat) | 4.000 |
Shaped OD 1 (Flat to Flat) | 2.5 |
Shaped OD 2 (Flat to Flat) | 4.6 |
Shape | Rectangular |
Surface Finish (exterior) | Cello Wrap Gloss |
Wall Thickness | .25 |
Length | 105 |
Technical Data
Layup Orientation
SKU: 25511 Rev B |
||
Ply # | Orientation | Location |
1 - 3 | 0 | Inside |
4 - 5 | 90 | ↓ |
6 - 11 | 0 (on 2" sides only) | |
12 - 13 | +/- 45 | |
14 - 15 | 0 | |
16 | 90 | |
17 - 18 | 0 | |
19 - 20 | +/- 45 | |
21 - 26 | 0 (on 2" sides only) | |
27 - 28 | 90 | |
29 - 31 | 0 | |
32 | 0/90 | Outside |
- 0° Fibers maximize bending stiffness. Consider bending the tube over your knee.
- 45° Fibers maximize torsional stiffness. Typically plied together in an opposing manner, i.e. ±45°. Consider twisting the tube like a vehicle's driveshaft.
- 90° Fibers maximize crushing stiffness and generally assist in overall tube strength. Consider laying the tube on the ground and stepping on it.