Tube - Filament Wound - HS40 Torque Layup - Unsanded - 0.625 x ~0.96 x 12 Inch - Sold by the foot - Available up to 108 Inches
0.625" ID Filament Wound Tube ◾ Unsanded Finish ◾ Long Lengths Available off the Shelf ◾ High Modulus Carbon Fiber
- 1-3 $83.99
- 4-26 $71.79
- 27-53 $64.59
- 54+ $57.39
Features & Benefits
Carbon Fiber Material | Modulus, Strength | Benefits, Features & Notes
- Standard Modulus | 34 msi, 700 ksi | Good structural properties - Stiffer than aluminum - Readily available
- Intermediate Modulus | 42 msi, 825 ksi | Great structural properties - Highest strength option - Great balance of stiffness and strength
- High Modulus | 57 msi, 670 ksi | Very stiff - Good thermal conductivity / stability - Typically used in all 0° & 90° (or off-axis) plies throughout the ply sequence / laminate orientation.
- Ultra High Modulus | 94 msi, 414 ksi | Stiffest option available - Great thermal conductivity - Used primarily as 0° plies in combination with lower modulus / higher strength fibers in the 90° orientation to create a well-balanced and functional composite structure.
*Values listed above are reflective only of the fiber NOT the composite matrix (fiber + resin) and are listed only for tensile modulus and strength. ***Theoretical values are currently not available for this tube but testing can be performed upon request for a fee
|Materials||High Modulus Carbon|
|Pattern||Filament Wound - Unsanded|
|Surface Finish (exterior)||As Wound / Unsanded|
We cannot supply any layup details for the filament wound tubing at this time.