Tube - Fabric - 0.375 x 0.459 x 60 Inch
P/N
45524
- 1-9 $52.99
- 10-49 $47.79
- 50-99 $43.59
- 100+ $40.39
Features & Benefits
Fabric roll wrapped tubing offers many benefits over uni-directional and even filament wound tubing. That isn't to say it is the best however. Here are a few reasons you may wish to consider fabric roll wrapped tubing for your application.
- Superior machine ability
- Much better durability by reducing the potential extent of fiber breakout if drilled, machined or damaged
- Typical aesthetic associated with carbon fiber products
- Most "fabric" tubes contain a majority 0° plies in the layup allowing for the most effective bending load support. (whereas filament wound tubes cannot achieve angles less than ~7°
Additional Information
P/N | 45524 |
---|---|
Space Flight Ready | No |
Traceability Included | No |
Inside Dimension | 0.375000 |
Outside Dimension | 0.459000 |
Thickness | 0.000000 |
OD | 0.459000 |
Wall | 0.042000 |
Length | 60 |
Tensile Modulus (Stiffness), msi | 9.175000 |
Max Operating Temp (Tg) | 238.000000 |
WT. | 0.170000 |
Materials | Standard Modulus Carbon |
HTS - Harmonized Tariff Code | 6815.13.0000 |
Surface Finish (exterior) | Cello Wrap Gloss |
Technical Data
Estimated Laminate Stiffness Properties (psi) | ||||
EX | EY | GXY | EXB | EYB |
9.175E+06 | 5.819E+06 | 1.036E+06 | 1.107E+07 | 3.518E+06 |
Estimated Laminate CTE Properties (ppm/°F) | ||
CTE_X | CTE_Y | CTE_XY |
3.60E-07 | 1.21E-06 | -1.94E-20 |
Estimated Laminate Strength Properties (psi) | |||||
Failure Theory | X-Axis Tension | X-Axis Compression | Y-Axis Tension | Y-Axis Compression | XY Shear |
Max Stress | 6.279E+04 | -7.022E+04 | 2.340E+04 | -6.128E+04 | 9.064E+03 |
Layup Orientation
SKU : 45524 Rev A |
||
Ply # | Orientation | Location |
1 | 0 | Inside |
2 | 0 | ↓ |
3 | 0 | |
4 | 90 | |
5 | 90 | |
6 | 0/90 | Outside |
- 0° Fibers maximize bending stiffness. Consider bending the tube over your knee.
- 45° Fibers maximize torsional stiffness. Typically plied together in an opposing manner, i.e. ±45°. Consider twisting the tube like a vehicle's driveshaft.
- 90° Fibers maximize crushing stiffness and generally assist in overall tube strength. Consider laying the tube on the ground and stepping on it.
Request A Quote