Tube - Fabric - 0.250 x 0.392 (10mm) x 72 inch (Globally Sourced)

Unlike metals which have similar properties in all directions (isotropic), the properties of composites are varying, dependent on the orientation of the fibers in each layer. This particular carbon fiber fabric tube has an internal diameter (ID) of 0.25" and an outer diameter (OD) of 0.392". The outer ply of material on this tube is a 2x2 twill weave (diagonal appearance seen below) which will prevent fiber breakout better than unidirectional material. Thus fabric tubes provide an ideal surface for machining. The core of this tube is almost always comprised of multi-directional "uni" plies which makes most carbon fiber fabric & unidirectional tubes ideal for bending and compression applications.

Roll wrapped tubing is manufactured using multiple layers of prepreg carbon fiber (and if noted, other) materials. In general each layer is about 0.006 inches thick which means that a tube with a wall thickness of 0.060 inches will typically be composed of 9-10 individual layers of carbon fiber. The number of layers(plys) allows us to vary the orientation of the fibers throughout the thickness, creating a high performance, engineered product.

Roll Wrapped Fabric Tubing Facts

• Ideal for bending and compression applications
• 2x2 twill weave provides a traditional carbon fiber aesthetic
• 0.25" ID x 0.392" OD x 72" Long
• Gloss Finish, can be sanded to remove gloss. Option available in customization box.
• Learn about our Roll Wrapping Process



*This diagram illustrates a "generic" layup. The SKU being viewed may not have the layup schedule shown in this diagram. To view this SKU's particular layup please check out the "LAYUP ORIENTATION" tab.