Tube - Unidirectional - 1.75 x 1.82 x 72 Inch - BLOWOUT
Unidirectional Carbon Fiber Tube ◾ Great for Bending & Compression
- 1-5 $158.99
- 6-24 $142.79
- 25-49 $134.59
- 50+ $122.39
Features & Benefits
Roll wrapped tubing is manufactured using multiple layers of prepreg carbon fiber (and if noted, other) materials. In general each layer is about 0.006 inches thick which means that a tube with a wall thickness of 0.060 inches will typically be composed of 9-10 individual layers of carbon fiber. The number of layers (plys) allows us to vary the orientation of the fibers throughout the thickness, creating a high performance, engineered product. Click HERE to learn more about our roll wrapping process.
*Please note, the diagram below shows an outer "0/90" ply however the product you are currently viewing does NOT have this outer twill ply.
*This diagram illustrates a "generic" layup. The SKU being viewed may not have the layup schedule shown in this diagram. To view this SKU's particular layup please check out the "LAYUP ORIENTATION" tab.
Additional Information
ID | 1.750000 |
---|---|
OD | 1.820000 |
Wall | 0.035000 |
Length | 72 |
Max Operating Temp (Tg) | 238F |
WT. | 0.820000 |
Materials | Standard Modulus Carbon |
Pattern | Unidirectional |
Surface Finish (exterior) | Cello Wrap Gloss |
Technical Data
SKU: 45638 Rev A |
||
Ftu-Lengthwise | 131 | ksi |
Tension Strength | 25.9 | k-lb |
Fcu-Lengthwise | 80 | ksi |
Compression Strength | 15.8 | k-lb |
Flexure Strength | 80 | ksi |
Internal Pressure | 450 | psi |
Tension Modulus | 12.7 | Msi |
Compression Modulus | 12.4 | Msi |
Layup Orientation
SKU: 45638 Rev A |
||
Ply # | Orientation | Location |
1 | 0 | Inside |
2 | 0 | ↓ |
3 | 90 | |
4 | 90 | |
5 | 0 | |
6 | 0 |
- 0° Fibers maximize bending stiffness. Consider bending the tube over your knee.
- 45° Fibers maximize torsional stiffness. Typically plied together in an opposing manner, i.e. ±45°. Consider twisting the tube like a vehicle's driveshaft.
- 90° Fibers maximize crushing stiffness and generally assist in overall tube strength. Consider laying the tube on the ground and stepping on it.