Tube - Square - Plain Weave - High Modulus - 1.50 x 1.58 x 66 inch [BUILT TO ORDER]
P/N
25497-HM
Built To Order ◾ Lead times are usually 2 weeks ◾ High quantities may have an increased lead time
- 1 $619.99
- 2-4 $474.79
- 5-9 $390.59
- 10+ $317.39
Additional Information
P/N | 25497-HM |
---|---|
Built To Order | Yes |
Inside Dimension | 1.500000 |
Outside Dimension | 1.580000 |
Application | General Purpose |
Materials | High Modulus Carbon |
WT. | 0.710000 |
Inner Diameter (long) | 1.500 |
Outer Diameter (short) | 1.580 |
Outer Diameter (Flat to Flat) | 1.58 |
Shape | Square |
Space Flight Ready | No |
Traceability Included | No |
Surface Finish (exterior) | Cello Wrap Gloss |
Wall Thickness | 0.040 |
Length | 66 |
Technical Data
Radius of Tubing
The inner and external corner radii are measured by hand with a radius gauge with no tolerance called out.- Internal Radius: 3/16”
- External Radius: 1/4”.
We cannot supply theoretical values for this tube at this time. For specification sheets and other data we can supply please review our Technical Spec page.
Layup Orientation
SKU : 25497-HM Rev C |
||
Ply # | Orientation | Location |
1 | 0 | Inside |
2 | 0 | ↓ |
3 | 0 | |
4 | 45 | |
5 | -45 | |
6 | 45 | |
7 | -45 | |
8 | 0 | |
9 | 0 | |
10 | 0/90 | Outside |
- 0° Fibers maximize bending stiffness. Consider bending the tube over your knee.
- 45° Fibers maximize torsional stiffness. Typically plied together in an opposing manner, i.e. ±45°. Consider twisting the tube like a vehicle's driveshaft.
- 90° Fibers maximize crushing stiffness and generally assist in overall tube strength. Consider laying the tube on the ground and stepping on it.
Request A Quote