Tube - Square - Fabric - 3.985 x 4.22 x 66 inch [BUILT TO ORDER]
P/N
25517
Built To Order ◾ Lead times are usually 2 weeks ◾ High quantities may have an increased lead time
- 1 $1,778.99
- 2-4 $1,519.79
- 5-9 $1,375.59
- 10+ $1,213.39
Features & Benefits
Fabric roll wrapped tubing offers many benefits over uni-directional and even filament wound tubing. That isn't to say it is the best however. Here are a few reasons you may wish to consider fabric roll wrapped tubing for your application.
- Superior machine ability
- Much better durability by reducing the potential extent of fiber breakout if drilled, machined or damaged
- Typical aesthetic associated with carbon fiber products
- Most "fabric" tubes contain a majority 0° plies in the layup allowing for the most effective bending load support. (whereas filament wound tubes cannot achieve angles less than ~7°
Additional Information
P/N | 25517 |
---|---|
Built To Order | Yes |
Inside Dimension | 3.985000 |
Outside Dimension | 4.220000 |
Application | General Purpose |
Materials | Standard Modulus Carbon |
WT. | 7.460000 |
Inner Diameter (long) | 3.985 |
Outer Diameter (short) | 4.22 |
Outer Diameter (Flat to Flat) | 4.22 |
Shape | Square |
Space Flight Ready | No |
Traceability Included | No |
Surface Finish (exterior) | Cello Wrap Gloss |
Wall Thickness | 0.12 |
Length | 66 |
Technical Data
Radius of Tubing
The inner and external corner radii are measured by hand with a radius gauge with no tolerance called out.- Internal Radius: 1/4”
- External Radius: 5/16”.
We cannot supply theoretical values for this tube at this time. For specification sheets and other data we can supply please review our Technical Spec page.
Layup Orientation
SKU: 25517 Rev NC |
||
Ply # | Orientation | Location |
1 | 0 | Inside |
2 | 0 | ↓ |
3 | 0 | |
4 | 0 | |
5 | +45 | |
6 | -45 | |
7 | 0 | |
8 | 0 | |
9 | +45 | |
10 | -45 | |
11 | 0 | |
12 | 0 | |
13 | +45 | |
14 | -45 | |
15 | 0 | |
16 | 0 | |
17 | 0 | |
18 | 0 | |
19 | 0/90 | Outside |
- 0° Fibers maximize bending stiffness. Consider bending the tube over your knee.
- 45° Fibers maximize torsional stiffness. Typically plied together in an opposing manner, i.e. ±45°. Consider twisting the tube like a vehicle's driveshaft.
- 90° Fibers maximize crushing stiffness and generally assist in overall tube strength. Consider laying the tube on the ground and stepping on it.
Request A Quote