Tube - Filament Wound - Unsanded Fiberglass Outer - Torque - 2.50 x ~2.78 x 12 Inch - Sold by the foot - Available up to 182 Inches
+/- 45 Degree Layup ◾ Protective Outer Glass Ply ◾ Engineered For Driveshaft Applications & Other High Torque Transfer Needs
- 1-2 $121.99
- 3-11 $102.79
- 12-35 $93.59
- 36+ $85.39
Additional Information
P/N | 35152-GTRQ-U |
---|---|
Space Flight Ready | No |
Traceability Included | No |
Inside Dimension | 2.500000 |
Outside Dimension | 2.780000 |
Thickness | 0.000000 |
Application | Torque |
OD | 2.780000 |
Wall | 0.140000 |
Length | 12 |
Max Operating Temp (Tg) | 250.000000 |
WT. | 0.820000 |
Materials | Standard Modulus Carbon + Fiberglass |
HTS - Harmonized Tariff Code | 6815.13.0000 |
Surface Finish (exterior) | As Wound / Unsanded |
Technical Data
This 2.5” ID tube SKU 35152-GTRQ, was tested in a destructive failure test where the universal joints were removed and the shafts placed in a “pinned” yoke fixture. This destructive testing resulted in a sample average torsional strength to be 3267 lb/ft. Failure occurred in the tube when the adhesive broke and caused the yoke to slip inside the tube. This failure mode was unsatisfactory to us so we tested again with a ¾” bolt inserted through each of the bonded in yokes and carbon. This test resulted in a slightly higher strength and failure was caused by the adhesive breaking and the bolt being ripped through the carbon.
Layup Orientation
We cannot supply any layup details for the filament wound tubing at this time.