Tube - Filament Wound - Unsanded Fiberglass Outer - Torque - 3.00 x ~3.28 x 12 Inch - Sold by the foot - Available up to 144 Inches
+/- 45 Degree Layup ◾ Protective Outer Glass Ply ◾ Engineered For Driveshaft Applications & Other High Torque Transfer Needs
- 1-2 $135.99
- 3-11 $114.79
- 12-35 $104.59
- 36+ $94.39
Additional Information
P/N | 35153-GTRQ-U |
---|---|
Space Flight Ready | No |
Traceability Included | No |
Inside Dimension | 3.000000 |
Outside Dimension | 3.280000 |
Thickness | 0.140000 |
Application | Torque |
OD | 3.280000 |
Wall | 0.140000 |
Length | 12 |
WT. | 0.970000 |
Materials | Standard Modulus Carbon + Fiberglass |
HTS - Harmonized Tariff Code | 6815.13.0000 |
Surface Finish (exterior) | As Wound / Unsanded |
Technical Data
This specific SKU 35153-GTRQ was tested with bonded in yokes and using SFI Specification 43.1. The specification requires these tubes to be tested to a static torque of 2800 lb/ft for 10 seconds and then tested with a cyclic torque of +2500 lb/ft and –1000 lb/ft for 25 cycles. After static and cyclic testing was performed, a destructive failure test was performed and resulted in the sample average torsional strength being 5773 lb/ft. Failure occurred when the adhesive broke and caused the yoke to slip inside the tube. This failure mode was unsatisfactory to us so we decided to insert 2 - ¾” bolts through each of the bonded in yokes and carbon. This test resulted in a slightly higher strength and failure was caused by the adhesive breaking and the bolts being ripped through the carbon.
Layup Orientation
We cannot supply any layup details for the filament wound tubing at this time.