Tube - Unidirectional - 1.125 x 1.240 x (+LENGTH OPTIONS)
Unidirectional Carbon Fiber Tube ◾ Great for Bending & Compression
72" ◾ 1828mm
Sku:
45562
|
|
||
96" ◾ 2438mm
Sku:
45562-LONG
|
|
Features & Benefits
Roll wrapped tubing is manufactured using multiple layers of prepreg carbon fiber (and if noted, other) materials. In general each layer is about 0.006 inches thick which means that a tube with a wall thickness of 0.060 inches will typically be composed of 9-10 individual layers of carbon fiber. The number of layers (plys) allows us to vary the orientation of the fibers throughout the thickness, creating a high performance, engineered product. Click HERE to learn more about our roll wrapping process.
*Please note, the diagram below shows an outer "0/90" ply however the product you are currently viewing does NOT have this outer twill ply.
*This diagram illustrates a "generic" layup. The SKU being viewed may not have the layup schedule shown in this diagram. To view this SKU's particular layup please check out the "LAYUP ORIENTATION" tab.
Additional Information
P/N | 45562 | 45562-LONG |
---|---|---|
Space Flight Ready | No | No |
Traceability Included | No | No |
Inside Dimension | 1.125000 | 1.125000 |
Outside Dimension | 1.240000 | 1.240000 |
OD | 1.240000 | 1.240000 |
Wall | 0.058000 | 0.058000 |
Length | 72 | 96 |
Tensile Modulus (Stiffness), msi | 14.820000 | 14.820000 |
Max Operating Temp (Tg) | 238.000000 | 238.000000 |
WT. | 0.960000 | 1.280000 |
Materials | Standard Modulus Carbon | Standard Modulus Carbon |
HTS - Harmonized Tariff Code | 6815.13.0000 | 6815.13.0000 |
Surface Finish (exterior) | Cello Wrap Gloss | Cello Wrap Gloss |
Technical Data
SKU: 45562 Rev A |
||
Ftu-Lengthwise | 138 | ksi |
Tension Strength | 29.2 | k-lb |
Fcu-Lengthwise | 84 | ksi |
Compression Strength | 17.8 | k-lb |
Flexure Strength | 84 | ksi |
Internal Pressure | 940 | psi |
Tension Modulus | 13.3 | Msi |
Compression Modulus | 13.0 | Msi |
Layup Orientation
SKU: 45562 Rev A |
||
Ply # | Orientation | Location |
1 | 0 | Inside |
2 | 0 | ↓ |
3 | 0 | |
4 | 0 | |
5 | 90 | |
6 | 90 | |
7 | 90 | |
8 | 0 | |
9 | 0 | |
10 | 0 | Outside |
- 0° Fibers maximize bending stiffness. Consider bending the tube over your knee.
- 45° Fibers maximize torsional stiffness. Typically plied together in an opposing manner, i.e. ±45°. Consider twisting the tube like a vehicle's driveshaft.
- 90° Fibers maximize crushing stiffness and generally assist in overall tube strength. Consider laying the tube on the ground and stepping on it.