Tube - Filament Wound - Unsanded - 1.750 X ~2.030 X 12 Inch -- Available up to 180 Inches

P/N: 35148-fg-u-12
Available On Backorder

There is a $20 cutting charge for each tube ordered that has a length less than the maximum available tube length. The standard cutting tolerance on these tubes is 0.125”.

$87.99
Volume discounts will be applied in the shopping cart.
Estimated lead time for quantities greater than what is Available Now is expected to be between 2 and 4 weeks.

Please note we cannot control the OD of unsanded filament tubing as tightly as the sanded filament tubing. The listed OD is a theoretical value.

Very long continuous fibers add to strength and stiffness. Excellent for torsion, long single-piece tubes, and a unique aesthetic. Most economical for larger scale production. 

Note: we carry a limited number in stock. Larger orders may require a 2-3 week lead time.

Additional Information

Materials Fiberglass
Pattern Filament Wound
Color 913
Finish Cello Wrap Gloss
Inside Diameter 1.75
Outside Diameter 2.03
Wall Thickness 0.140
Length 12
Length (max continuous) 180.0
Linear Density 0.648
Volumetric Density 0.065
Weight 9.726
Primary Fiber E-Glass
Primary Resin / Hardener EPON 862/Lindride 6k

Layup Orientation

35148-fg-u-12 Rev NC

Ply # Orientation (degrees) Location
1 ±15 Inside
2 ±45 ↓
3 Hoop
4 ±15
5 ±15
6 ±15 Outside
  • 0° fibers maximize bending stiffness and run along the length of the part. Consider bending a tube over your knee.
  • 45° fibers maximize torsional stiffness and are typically plied together in an opposing manner, i.e. ±45°. Consider twisting a tube like a vehicle's driveshaft.
  • 90° (or "hoop") fibers maximize crushing stiffness and generally assist in overall durability. Consider laying a tube on the ground and stepping on it.
Contact Info
Tube - Filament Wound - Unsanded - 1.750 X ~2.030 X 12 Inch -- Available up to 180 Inches
P/N 35148-fg-u-12