Tube - Filament Wound - Unsanded Fiberglass Outer - Torque - 2.50 x ~2.78 x 12 Inch - - Available up to 182 Inches

productname image number 0
productname image number 1
productname image number 0
productname image number 1
P/N: 35152-GTRQ-U

There is a $15 cutting charge for each tube ordered that has a length less than the maximum available tube length. The standard cutting tolerance on these tubes is 0.125”.

P/N: 35152-GTRQ-U
$157.99
Contact Info
Project Details
Quantity must be greater than 1.
or
Please select a valid length.
Precision of Measurement
Please select a tolerance option.
    • ~0.005 reduction on outer diameter (OD)."
    • This removes the outer cello wrap gloss finish.
    • Sand outer diameter to specified thickness.
    • Patterns will likely distort in appearance
    Please select a value within the allowed range.
    Sanding Tolerance Options:
    Please select a tolerance option.

If you are requesting bulk discounts, cutting, or standard sanding services only, we will send you a cart with your product selections. You may enter your shipping information and purchase directly at that time. Please note, the cart will not allow edits to the quote. Any changes will have to be completed by our team. If we do not have enough information to complete your quote we will reach out to you directly. If you are requesting additional services or custom sanding, a team member will reach out to you to finalize a quote.

If you request a custom length you will be charged for a full length item (or items if more than 1 is needed to meet your request) plus a cutting fee. You will then be shipped the item sized to your specification and any remaining length of the orginal item (drops). Sanding also incurs a fee which will be included in the quote. All items that have been sanded or cut may not be returned.

Estimated lead time for quantities greater than what is Available Now is expected to be between 2 and 4 weeks.

Please note we cannot control the OD of unsanded filament tubing as tightly as the sanded filament tubing. The listed OD is a theoretical value.

let your capacity and delivery time concerns wash away. Rock West has 13 spindles on 3 separate winding machines allowing us to product tubes in lengths up to 230". If this diameter is not a perfect match for your needs, and or you have a unique torque transfer need be sure to let us know. We build these parts right here in the USA.

Additional Information

P/N 35152-GTRQ-U
Application Torque
Finish As Wound / Unsanded
HTS - Harmonized Tariff Code 6815.13.0000
Inside Dimension 2.5
Length 12
Materials Standard Modulus Carbon + Fiberglass
Temperature Rating (F) 250.0
OD 2.78
Outside Dimension 2.78
Thickness 0.14
Weight 0.82

Technical Data

This 2.5” ID tube SKU 35152-GTRQ, was tested in a destructive failure test where the universal joints were removed and the shafts placed in a “pinned” yoke fixture. This destructive testing resulted in a sample average torsional strength to be 3267 lb/ft. Failure occurred in the tube when the adhesive broke and caused the yoke to slip inside the tube. This failure mode was unsatisfactory to us so we tested again with a ¾” bolt inserted through each of the bonded in yokes and carbon. This test resulted in a slightly higher strength and failure was caused by the adhesive breaking and the bolt being ripped through the carbon.

Tolerances

STOCK TOLERANCE SHEET

Download PDF

Layup Orientation

We cannot supply any layup details for the filament wound tubing at this time.

Contact Info
Tube - Filament Wound - Unsanded Fiberglass Outer - Torque - 2.50 x ~2.78 x 12 Inch - - Available up to 182 Inches
P/N 35152-GTRQ-U
Trustpilot