Carbon Fiber Plate - Twill Weave - Standard Modulus - Gloss / Matte - 48" x 48" x 5/64"
Carbon Fiber Plate - Twill Weave - Standard Modulus - Gloss / Matte - 48" x 48" x 5/64"
Click to view and choose plate sizes available
Manufactured using resin infusion to achieve near perfection, porous free laminates!
Quick Facts for our Resin Infused Carbon Fiber Gloss/Matte Plate
- Top side near glass reflective gloss surface
- Bottom side matte textured surface
- 0.052 lbs / in^3 OR 1.45 grams / cm^3
- Ready for machining or waterjet cutting
- Minimal to zero fatigue failures
- Structurally sound and cosmetically stunning
- Ideal for RC models including multi-rotor airframes
- Glass Transition Temperature (Tg) is 194°F
- Shore D hardness ~90D
Special Return Policy - Blowout/Blemished
Rock West Composites will NOT return or refund blowout or blemished items. This applies to all materials listed as a -blowout or a -blem.
</401-66br> </401-612br> </401-11br> </401-624br> </401-12br> </401-648br> </401-22br> </401-24br> </401-44br> </401-410br> </402-66br> </402-612br> </402-11br> </402-624br> </402-648br> </402-12br> </402-22br> </402-24br> </402-44br> </402-410br> </403-66br> </403-612br> </403-11br> </403-624br> </403-648br> </403-12br> </403-22br> </403-24br> </403-44br> </403-410br> </404-r3br> </404-66br> </404-r6br> </404-6.4br> </404-612br> </404-11br> </404-624br> </404-12br> </404-648br> </404-22br> </404-24br> </404-44br> </404-410br>
Additional Information
| Application | General Purpose |
|---|---|
| Materials | Standard Modulus Carbon |
| Pattern | 3k 2X2 Twill Weave |
| Color | Black |
| Finish | Gloss / Matte |
| Panel Thickness | 0.080000 |
| Plate / Panel Size | 48" x 48" / 1219.2mm x 1219.2mm |
| Width | 48.0 |
| Thickness | 0.08 |
| Length | 48 |
| Length (max continuous) | 48.0 |
| Areal Density | 0.634 |
| Volumetric Density | 0.055 |
| Weight | 10.138 |
| Primary Fiber | Toray T700S |
| Primary Resin / Hardener | Rhino 1411/4111 |
Engineering Properties
All laminate properties and mechanical calculations are based on Classical Lamination Theory and should be used as a reference only. Rock West Composites does not guarantee these properties or calculations.
| Avg EX Young's Modulus | 9300000.0 |
|---|---|
| Avg EY Young's Modulus | 9300000.0 |
| GXY Shear Modulus | 600000.0 |
| X Tensile Yield Strength | 103000.0 |
| X Compressive Yield Strength | 89000.0 |
| Y Tensile Yield Strength | 103000.0 |
| Y Compressive Yield Strength | 89000.0 |
| XY Shear Strength | 10636.0 |
| CTEX | 2.00E-06 |
| CTEY | 2.00E-06 |
| Poisson's Ratio vXY | 0.035 |
| Poisson's Ratio vYX | 0.035 |
- "X" is along the length of a tube, rod, plate, or panel.
- "Y" is around the perimeter of a tube, perpendicular to the length of pultruded parts, or along the width of a plate or panel.
Layup Orientation
400-2MM-44 Rev NC
| Ply # | Orientation (degrees) | Location |
|---|---|---|
| 1 | All 0/90 | Inside |
- 0° fibers maximize bending stiffness and run along the length of the part. Consider bending a tube over your knee.
- 45° fibers maximize torsional stiffness and are typically plied together in an opposing manner, i.e. ±45°. Consider twisting a tube like a vehicle's driveshaft.
- 90° (or "hoop") fibers maximize crushing stiffness and generally assist in overall durability. Consider laying a tube on the ground and stepping on it.