VENEER - CARBON FIBER - 3K PLAIN WEAVE – GLOSS WITH ADHESIVE BACKING – 3" X 48" X 0.02" / 0.5MM THICK

Click to View

Manufactured using resin infusion to achieve a near perfect, porous free veneer. Finally, get the carbon fiber look you have been itching for, everywhere! This carbon fiber sheet is made with real carbon fiber (Toray T300 in fact) and is ideal for applications where cosmetic requirements outweigh structural. This plate is easily trimmed with scissors (by hand!) allowing its use in a huge variety of applications such as clearing electronics in a dashboard or door sills in your McLaren. Oh wait, carbon fiber is already there!

Being only as thick as 4 pieces of copy paper this carbon fiber veneer shows what appear to be pinholes in between the individual strands / tows of carbon fiber when held up to a light source. Rest assured however, these are not pinholes and disappear completely once glued or stuck to any opaque substrate surface such as wood, plastic or other solid surface.

Quick Facts About Our 0.02" Thick Carbon Fiber Gloss/Matte Plate

• Top side near glass reflective gloss surface
• Bottom side adhesive backing
• Can be cut with scissors or shears
• Can bend to non complex curves to a radius as small as 0.5" (around one axis only, like a tube)
• Comprised of 1 ply of 200 GSM 3k Plain Weave fabric
• 0.052 lbs / in^3 OR 1.45 grams / cm^3
• Ideal for cosmetic applications requiring only a thin carbon fiber veneer
• Glass Transition Temperature (Tg) is 194°F 
• Shore D hardness ~90D

Looking for something even more affordable, moldable / stretchable? Check out our Carbon Fiber Vinyls. They are avaialble in numerous styles, sizes and colors!