Tube - Plain Weave - NEG ZTE - Thin Wall - 0.250 X 0.332 X 60 Inch

productname image number 0
productname image number 1
productname image number 0
productname image number 1
P/N: 45492-ZTE

P/N: 45492-ZTE
1
$334.99
2 - 4
$212.79
5 - 9
$140.59
10 +
$88.39
Contact Info
Project Details
Quantity must be greater than 1.
or
Please select a valid length.
Precision of Measurement
Please select a tolerance option.
    • ~0.005 reduction on outer diameter (OD)."
    • This removes the outer cello wrap gloss finish.
    • Sand outer diameter to specified thickness.
    • Patterns will likely distort in appearance
    Please select a value within the allowed range.
    Sanding Tolerance Options:
    Please select a tolerance option.

If you are requesting bulk discounts, cutting, or standard sanding services only, we will send you a cart with your product selections. You may enter your shipping information and purchase directly at that time. Please note, the cart will not allow edits to the quote. Any changes will have to be completed by our team. If we do not have enough information to complete your quote we will reach out to you directly. If you are requesting additional services or custom sanding, a team member will reach out to you to finalize a quote.

If you request a custom length you will be charged for a full length item (or items if more than 1 is needed to meet your request) plus a cutting fee. You will then be shipped the item sized to your specification and any remaining length of the orginal item (drops). Sanding also incurs a fee which will be included in the quote. All items that have been sanded or cut may not be returned.

Generally available to ship in two to four weeks.

ZTE CARBONTM High Modulus tubes are specifically designed for extremely low CTE.  Our precision processing and high stiffness materials makes them a good choice as affordable tubes for dimensionally stable structures such as optical benches, precision robotics and other similar structures.

Our tubes are specifically engineered to have essentially no residual distortion (hysterisis) in elongation, bend or twist after exposure to high or low temperatures in applications where such properties are required. 

Additional Information

P/N 45492-ZTE
Application Low CTE
Built To Order Yes
Finish Cello Wrap Gloss
HTS - Harmonized Tariff Code 6815.13.0000
Inside Dimension 0.25
Length 60
Materials High Modulus Carbon
Temperature Rating (F) 280.0
OD 0.33
Outside Dimension 0.33
Space Flight Ready true
Tensile Modulus, msi 16.32
Thickness 0.04
Weight 0.14

Technical Data

We offer two tube products to choose from:  -P engineered to have a slightly positive CTE, and -N engineered to have a slightly negative CTE.

Typical Values -P -N
  Elongation (ppm/°F)     0.04     -0.05  
  Twist (Arcsec/ft./°F)     ±0.10     ±0.15  
  Bend (Arcsec/ft./°F)     ±0.08     ±0.08  
  Modulus (MSI)     21     21  

*Note: CTE values listed here are on average 20x lower than typical carbon fiber laminates!

Available on request

  • CTE Testing
  • Custom Sizes

 

ZTE Tubing Data Sheet

Download PDF

Tolerances

STOCK TOLERANCE SHEET

Download PDF

Layup Orientation

Orientation of Layers in Tubing Exposed

 

Layup Schedule For This Tube
Ply # Orientation Location
1   Inside
2   ↓
3  
4  
5

We Cannot Provide

Layups at this time
6  
7  
8  
9   Outside
 
  • 0° Fibers maximize bending stiffness. Consider bending the tube over your knee.
  • 45° Fibers maximize torsional stiffness. Typically plied together in an opposing manner, i.e. ±45°. Consider twisting the tube like a vehicle's driveshaft.
  • 90° Fibers maximize crushing stiffness and generally assist in overall tube strength. Consider laying the tube on the ground and stepping on it.
Contact Info
Tube - Plain Weave - NEG ZTE - Thin Wall - 0.250 X 0.332 X 60 Inch
P/N 45492-ZTE