Tube - Round - INFINITubeV - High Modulus - Plain Weave - Size 00 - 0.250 X 0.352 X 62 Inch
62” ◾ 1575mm
Our high modulus carbon fiber tube is 50% stiffer than standard carbon fiber tubes. High modulus carbon fiber provides excellent thermal conductivity and stability. Our high modulus tubes typically employ 0° & 90° plies throughout the ply sequence / laminate orientation.
INFINITubeV high modulus tubing is manufactured for use with button clips, push button ball lock pins or you can design your own.
INFINITubeV High Modulus Tubing Quick Facts
- Very stiff - Good thermal conductivity / stability.
- Gloss finish, can be sanded to remove gloss. Option available in customization box.
- Huge diameter range so you can hop on or off anywhere in the spectrum.
- Use UHMW low friction tape to maintain snug fit.
- UHMW tape can be used to prevent tubes from pulling apart at full extension
- All INFINITubeV tubes (part #'s 464xx) have an ultra thin woven fiberglass inner layer to maintain superior machine-ability for hole drilling (if using button clips or locking pins) or slot cutting
- Great for machining - Fabric inner and outer plies minimize "breakout" typically associated with drilling into composites
Learn about our Roll Wrapping Process.
Features & Benefits
Example of INFINITubeV Size 00 & Size 01
- (A): INFINITubeV Size 00
- (B): INFINITubeV Size 01
- (C): Two layers of low friction tape 8950-12
How to Build Your Own Telescoping System
Additional Information
| Telescoping Tube Family | INFINITubeV - Design Your Own |
|---|---|
| Shape | Round |
| Materials | High Modulus Carbon |
| Pattern | 1k Plain Weave |
| Color | Black |
| Finish | Cello Wrap Gloss |
| Inside Diameter | 0.25 |
| Outside Diameter | 0.352 |
| Wall Thickness | 0.051 |
| Length | 62 |
| Length (max continuous) | 62.0 |
| Linear Density | 0.033 |
| Volumetric Density | 0.057 |
| Weight | 0.17 |
| Primary Fiber | Toray M40J |
| Primary Resin / Hardener | Eporite EHM82 |
| HTS - Harmonized Tariff Code | 6815.13.0000 |
Engineering Properties
All laminate properties and mechanical calculations are based on Classical Lamination Theory and should be used as a reference only. Rock West Composites does not guarantee these properties or calculations.
| Avg EX Young's Modulus | 1.894E7 |
|---|---|
| Avg EY Young's Modulus | 7476000.0 |
| GXY Shear Modulus | 1163000.0 |
| X Tensile Yield Strength | 124200.0 |
| X Compressive Yield Strength | 103900.0 |
| Y Tensile Yield Strength | 42840.0 |
| Y Compressive Yield Strength | 49950.0 |
| XY Shear Strength | 10600.0 |
| CTEX | 4.89E-07 |
| CTEY | 2.44E-06 |
| Poisson's Ratio vXY | 0.044 |
| Poisson's Ratio vYX | 0.017 |
- "X" is along the length of a tube, rod, plate, or panel.
- "Y" is around the perimeter of a tube, perpendicular to the length of pultruded parts, or along the width of a plate or panel.
Calculators
All laminate properties and mechanical calculations are based on Classical Lamination Theory and should be used as a reference only. Rock West Composites does not guarantee these properties or calculations.
Layup Orientation
46400-HM Rev B
| Ply # | Orientation (degrees) | Location |
|---|---|---|
| 1 | (0/90 120 E-Glass Scrim) | Inside |
| 2 | 90 | ↓ |
| 3 | 90 | |
| 4 | 0 | |
| 5 | 0 | |
| 6 | 0 | |
| 7 | 0 | |
| 8 | 0/90 | Outside |
- 0° fibers maximize bending stiffness and run along the length of the part. Consider bending a tube over your knee.
- 45° fibers maximize torsional stiffness and are typically plied together in an opposing manner, i.e. ±45°. Consider twisting a tube like a vehicle's driveshaft.
- 90° (or "hoop") fibers maximize crushing stiffness and generally assist in overall durability. Consider laying a tube on the ground and stepping on it.