Tube - Round - INFINITubeV - Intermediate Modulus - Spread Tow - Size 10 - 1.500 X 1.59 X 74 Inch
1.500" ID INFINITubeV Size 10 ◾ Gloss Finish ◾ Spread Tow Pattern ◾ Highest Strength ◾ 42 MSI
Higher stiffness and strength. Similar to our standard modulus fabric tubing, with all the structural qualities of unidirectional tubing with an outer woven fabric ply. The intermediate modulus unidirectional fibers add stiffness and strength over the standard modulus. Our 1.500" ID x 1.606" OD intermediate modulus carbon fiber tube has great structural properties, offers the highest strength option and is a great balance of stiffness and strength.
For this particular set up you can review our How to Build Your Own INFINITubeV System
INFINITubeV 1.500" ID intermediate modulus tubing is manufactured for use with button clips, push button ball lock pins or you can design your own. Specially designed clamps (size 2) are now available. Additional sizes coming soon!
INFINITubeV 1.500" ID Intermediate Modulus Tubing Quick Facts
- 1.500" ID x 1.606" OD x Various Lengths
- 42 msi (825 ksi)
- Great balance of stiffness and strength
- Gloss finish, can be sanded to remove gloss. Option available in customization box
- Huge diameter range - 0.25" to 2.625" so you can hop on or off anywhere in the spectrum
- Use UHMW low friction tape to maintain snug fit & a cello wrap gloss finish
- Use the same tape above to prevent tubes from pulling apart at full extension
- All tubes (part #'s 464xx) in INFINITubeV have an ultra thin woven fiberglass inner layer to maintain superior machine-ability for hole drilling (if using button clips or locking pins) or slot cutting
- Great for machining - Fabric inner and outer plies minimize "breakout" typically associated with drilling into composites
- Learn about our Roll Wrapping Process
Features & Benefits
Example of INFINITubeV
- (A): INFINITubeV Size 10
- (B): INFINITubeV Size 11
- (C): Low friction tape
How to Build Your Own Telescoping System
Additional Information
| Application | Telescoping |
|---|---|
| Telescoping Tube Family | INFINITubeV - Design Your Own |
| Shape | Round |
| Materials | Intermediate Modulus Carbon |
| Pattern | 1111 |
| Color | Black |
| Finish | Cello Wrap Gloss |
| Inside Diameter | 1.5 |
| Outside Diameter | 1.606 |
| Wall Thickness | 0.053 |
| Length | 74 |
| Length (max continuous) | 74.0 |
| Linear Density | 0.174 |
| Volumetric Density | 0.056 |
| Weight | 1.072 |
| Primary Fiber | Toray T800S |
| Primary Resin / Hardener | Eporite EHM32 |
| HTS - Harmonized Tariff Code | 6815.13.0000 |
Engineering Properties
All laminate properties and mechanical calculations are based on Classical Lamination Theory and should be used as a reference only. Rock West Composites does not guarantee these properties or calculations.
| Avg EX Young's Modulus | 1.503E7 |
|---|---|
| Avg EY Young's Modulus | 6674000.0 |
| GXY Shear Modulus | 669300.0 |
| X Tensile Yield Strength | 108700.0 |
| X Compressive Yield Strength | 125000.0 |
| Y Tensile Yield Strength | 42870.0 |
| Y Compressive Yield Strength | 48210.0 |
| XY Shear Strength | 8927.0 |
| CTEX | 6.80E-07 |
| CTEY | 3.02E-06 |
| Poisson's Ratio vXY | 0.057 |
| Poisson's Ratio vYX | 0.025 |
- "X" is along the length of a tube, rod, plate, or panel.
- "Y" is around the perimeter of a tube, perpendicular to the length of pultruded parts, or along the width of a plate or panel.
Calculators
All laminate properties and mechanical calculations are based on Classical Lamination Theory and should be used as a reference only. Rock West Composites does not guarantee these properties or calculations.
Layup Orientation
46410-IM Rev NC
| Ply # | Orientation (degrees) | Location |
|---|---|---|
| 1 | (0/90 120 E-Glass Scrim) | Inside |
| 2 | 90 | ↓ |
| 3 | 90 | |
| 4 | 0 | |
| 5 | 0 | |
| 6 | 0 | |
| 7 | 0 | |
| 8 | 0/90 | Outside |
- 0° fibers maximize bending stiffness and run along the length of the part. Consider bending a tube over your knee.
- 45° fibers maximize torsional stiffness and are typically plied together in an opposing manner, i.e. ±45°. Consider twisting a tube like a vehicle's driveshaft.
- 90° (or "hoop") fibers maximize crushing stiffness and generally assist in overall durability. Consider laying a tube on the ground and stepping on it.