Carbon Reinforced Plate / Block - Carbon/PEEK - 5 x 5 x 0.375" / 9.5mm thick- BLOWOUT

P/N: PEEK-355
Available Now: 4

0.375" Thick ◾ 5" x 5" ◾ 127mm x 127mm- BLOWOUT

P/N: PEEK-355
Available Now: 4
$215.99
Estimated lead time for quantities greater than what is Available Now is expected to be between 2 and 4 weeks.
If there is an Available Now quantity listed above, it indicates our quantity in stock. Orders placed today for this quantity or less are expected to ship the next business day.

Click to view and choose plate sizes 

Please call for availability

Carbon Fiber Reinforced PEEK ◾ 5" x 5" x 0.375" (127mm x 127mm x 9.5mm) ◾ Chemical Resistant

PEEK CF30, 30% Carbon Fiber reinforced PEEK improves the compressive strength, stiffnessand load carrying capacity of PEEK,. It enhances load carrying capacity . This material provides significantly higher thermal conductivity than unreinforced PEEK and as a result and reduces its thermal expansion rate. It offers the highest chemical resistance of any semi-crystalline plastic with excellent retention of mechanical properties up to 570°F (300°C). PEEK offers a combination of superlative properties that allow it to replace metal in some of the most severe end-use environments.

Key Features Include:

  • Exceptional chemical resistance to organics, acids and bases
  • High mechanical strength in excess of 250°C (482°F)
  • Very good wear and abrasion resistance
  • Low CLTE and high limiting PV properties
  • Excellent resistance to hydrolysis in boiling water and superheated steam
  • Superior dielectric with low loss at high temperatures and frequencies
  • Ease of processing
  • High purity

Typical Applications:

  • Aircraft Hardware and fasteners
  • Aircraft mechanical components
  • Oil and gas processing equipment
  • Bearing retainers
  • Gears
  • Bushings
  • Seals
  • Thrust washers

Additional Information

P/N PEEK-355
Clearance Yes
Finish Matte / Matte
HTS - Harmonized Tariff Code 6815.13.0000
Plate / Panel Size 5" x 5" / 127mm x 127mm
Thickness 0.375
Weight 0.5
Width 5.0

Technical Data

CF30 DATA SHEET

Download PDF

Tolerances

STOCK TOLERANCE SHEET

Download PDF

Contact Info
Carbon Reinforced Plate / Block - Carbon/PEEK - 5 x 5 x 0.375" / 9.5mm thick- BLOWOUT
P/N PEEK-355