Spool - 40 lbs - E-Glass- OCV 158B-AB-450 TYPE-30 ROVING - 1100 TEX

158B Type 30® roving is specifically designed for use in filament winding and pultrusion applications with epoxy resin systems. Type 30 rovings are produced by pulling individual fibers directly from the bushing and winding them onto a roving package ready for shipment. The Type 30 roving process represents the optimum in glass forming technology and results in maximum strand integrity.

Fiberglass Tow Storage:

Unless otherwise specified, it is recommended to store glass fiber products in a cool, dry area. The packaging is not waterproof. Be sure to protect from the weather and other sources of water. It is recommended to bring the glass to room temperature 24 hours prior to use to allow the glass to equilibrate to room temperature.

Features of 158B Type 30 E-Glass Roving:

• Excellent Processing - 158B Type 30 roving has no catenary, which means smooth run-out throughout the package. In addition, 158B has low fuzz properties that will result in smoother parts, less cleanup and improved machine efficiencies. The Tack-Pak packaging allows virtually 100 percent transfer efficiency
• Fast Wet Out - The 158B sizing allows fast, uniform wet out of the strand in epoxy resin systems. Fast wet out should allow you to optimize the amount of time to make a part, increasing productivity and improving your competitive position in the market.
• Superior Burst Strength - The 158B Type 30 typically provides 15 percent higher burst pressure in pipe when compared to other high performance, epoxy compatible filament winding products.
• Increased Cycle Failures - The 158B Type 30 typically provides three times the cycles-to-failure when compared to other high performance and epoxy compatible rovings.
• Strength = 349 ksi | 69.8MPa
• Typical Yield = 1lb. = 450 yards
• TEX = 1100