VENEER - CARBON FIBER - 1K PLAIN WEAVE – GLOSS WITH ADHESIVE BACKING – 10" X 10" X 0.016" / 0.4MM THICK
1k Plain Weave ◾ Adhesive Backed ◾ 10" x 10"
Click to View
This carbon fiber sheet is made with real carbon fiber and is ideal for applications where cosmetic requirements outweigh structural. This plate is easily trimmed with scissors (by hand!) allowing its use in a huge variety of applications such as clearing electronics in a dashboard or door sills in your McLaren. Oh wait, carbon fiber is already there!
Each weave in our 1k veneer is about 1mm wide. Being only as thick as 3 pieces of copy paper this carbon fiber veneer shows what appear to be pinholes in between the individual strands / tows of carbon fiber when held up to a light source. Rest assured however, these are not pinholes and disappear completely once glued or stuck to any opaque substrate surface such as wood, plastic or other solid surface.
Quick Facts About Our Carbon Fiber Gloss Veneer
- Top side near glass reflective gloss surface
- Bottom side adhesive backing
- Can easily be cut with scissors or shears
- Can bend to non complex (cylindrical or conical) curves to a radius as small as 0.375"
- Comprised of 1 ply of 127 GSM 1k Plain Weave fabric
- 0.052 lbs / in^3 OR 1.45 grams / cm^3
- Ideal for cosmetic applications requiring only a thin tightly woven carbon fiber veneer
- Glass Transition Temperature (Tg) is 194°F
- Shore D hardness ~90D
Looking for something even more affordable, moldable / stretchable? Check out our Carbon Fiber Vinyls. They are available in numerous styles, sizes and colors!
Additional Information
| P/N | 401-1KP-ADH-1010 |
|---|---|
| Finish | Gloss / Adhesive Back |
| HTS - Harmonized Tariff Code | 6815.13.0000 |
| Materials | Standard Modulus Carbon |
| Plate / Panel Size | 10" x 10" |
| Thickness | 0.016 |
| Weight | 0.04 |
| Width | 10.0 |