Tube - Unidirectional - 2.50 x 2.628 x 72 Inch

productname image number 0
productname image number 1
productname image number 0
productname image number 1
P/N: 45651

P/N: 45651
1
$571.99
2 - 4
$427.79
5 - 9
$342.59
10 +
$271.39
Contact Info
Project Details
Quantity must be greater than 1.
or
Please select a valid length.
Precision of Measurement
Please select a tolerance option.
    • ~0.005 reduction on outer diameter (OD)."
    • This removes the outer cello wrap gloss finish.
    • Sand outer diameter to specified thickness.
    • Patterns will likely distort in appearance
    Please select a value within the allowed range.
    Sanding Tolerance Options:
    Please select a tolerance option.

If you are requesting bulk discounts, cutting, or standard sanding services only, we will send you a cart with your product selections. You may enter your shipping information and purchase directly at that time. Please note, the cart will not allow edits to the quote. Any changes will have to be completed by our team. If we do not have enough information to complete your quote we will reach out to you directly. If you are requesting additional services or custom sanding, a team member will reach out to you to finalize a quote.

If you request a custom length you will be charged for a full length item (or items if more than 1 is needed to meet your request) plus a cutting fee. You will then be shipped the item sized to your specification and any remaining length of the orginal item (drops). Sanding also incurs a fee which will be included in the quote. All items that have been sanded or cut may not be returned.

Estimated lead time for quantities greater than what is Available Now is expected to be between 2 and 4 weeks.

Unlike metals which have similar properties in all directions (isotropic), the properties of composites are varying, dependent on the orientation of the fibers in each layer. This tube is constructed utilizing multi-directional "uni" plies. This makes for a true workhorse of a tube with no frills. This tube is great for bending and compression applications however if you suspect this tube will be subject to general abuse in terms of abrasion / rocks etc. we would recommend you seek a fabric wrapped tube instead.

Features & Benefits

Roll wrapped tubing is manufactured using multiple layers of prepreg carbon fiber (and if noted, other) materials. In general each layer is about 0.006 inches thick which means that a tube with a wall thickness of 0.060 inches will typically be composed of 9-10 individual layers of carbon fiber. The number of layers (plys) allows us to vary the orientation of the fibers throughout the thickness, creating a high performance, engineered product.

*Please note, the diagram below shows an outer "0/90" ply however the product you are currently viewing does NOT have this outer twill ply.

*This diagram illustrates a "generic" layup. The SKU being viewed may not have the layup schedule shown in this diagram. To view this SKU's particular layup please check out the "LAYUP ORIENTATION" tab. 

Additional Information

P/N 45651
Built To Order Yes
Finish Cello Wrap Gloss
HTS - Harmonized Tariff Code 6815.13.0000
Inside Dimension 2.5
Length 72
Materials Standard Modulus Carbon
Temperature Rating (F) 238.0
OD 2.628
Outside Dimension 2.628
Tensile Modulus, msi 11.57
Thickness 0.064
Weight 2.16

Technical Data

We cannot supply any "CURED" theoretical data at this time. Please refer to the material data sheets below for fiber and the resin specification sheets. That is the only data we can supply at this time.

Carbon Fiber Specification Sheets

Resin System Specification Sheets

The common resin systems used in our pre preg processes is Newport 301 (used in the following products; 14033-D Carbon Twill, 14002-D Unidirectional, 14015-D Fiberglass Scrim & 14035-D Silver Texalium)

Tolerances

STOCK TOLERANCE SHEET

Download PDF

Layup Orientation

 

SKU: 45651 Rev A
Ply # Orientation Location
1 0 Inside
2 0 ↓
3 45
4 -45
5 90
6 90
7 45
8 -45
9 0
10 0
11 0 Outside
 
  • 0° Fibers maximize bending stiffness. Consider bending the tube over your knee.
  • 45° Fibers maximize torsional stiffness. Typically plied together in an opposing manner, i.e. ±45°. Consider twisting the tube like a vehicle's driveshaft.
  • 90° Fibers maximize crushing stiffness and generally assist in overall tube strength. Consider laying the tube on the ground and stepping on it.
Contact Info
Tube - Unidirectional - 2.50 x 2.628 x 72 Inch
P/N 45651
Trustpilot