Tube - Round - INFINITubeV - Ultra High Modulus - Unidirectional - Size 00 - 0.250 X 0.355 X 62 Inch
62” ◾ 1575mm
The higher the number the better, right? Unless you're golfing that's probably true. Composite materials offer incredible benefits when compared to metals but don't forget, there is a time and a place for each. So let us help you decide! Our ultra high modulus carbon fiber tube is 300% stiffer than standard carbon fiber tubes. Ultra high modulus carbon fiber provides excellent thermal conductivity and stability. Our ultra high modulus tubes typically employ 0° & 90° plies throughout the ply sequence / laminate orientation.
For more info on how to design your telescoping setup review our How to Build Your Own INFINITubeV System instrcutions.
INFINITubeV high modulus tubing is manufactured for use with compression ring clamps, button clips, push button ball lock pins, or you can design your own.
INFINITubeV Ultra High Modulus Tubing Quick Facts
- Extremely stiff - Incredible thermal conductivity / stability.
- Gloss finish, can be sanded to remove gloss. Option available in customization box.
- Use UHMW low friction tape to maintain snug fit.
- UHMW tape can be used to prevent tubes from pulling apart at full extension
- NOTE This InfinitubeV part does NOT have an ultra thin woven fiberglass inner layer.
Learn about our Roll Wrapping Process.
Features & Benefits
Example of INFINITubeV Size 00 & Size 01
- (A): INFINITubeV Size 00
- (B): INFINITubeV Size 01
- (C): Two layers of low friction tape 8950-12
How to Build Your Own Telescoping System
Additional Information
| Telescoping Tube Family | INFINITubeV - Design Your Own |
|---|---|
| Shape | Round |
| Materials | Ultra High Modulus Carbon |
| Pattern | Unidirectional |
| Color | Black |
| Finish | Cello Wrap Gloss |
| Inside Diameter | 0.25 |
| Outside Diameter | 0.352 |
| Wall Thickness | 0.051 |
| Length | 62 |
| Length (max continuous) | 62.0 |
| Linear Density | 0.035 |
| Volumetric Density | 0.06 |
| Weight | 0.179 |
| Primary Fiber | Pyrofil K63712 |
| Primary Resin / Hardener | Newport 301 |
| HTS - Harmonized Tariff Code | 6815.13.0000 |
Engineering Properties
All laminate properties and mechanical calculations are based on Classical Lamination Theory and should be used as a reference only. Rock West Composites does not guarantee these properties or calculations.
| Avg EX Young's Modulus | 3.518E7 |
|---|---|
| Avg EY Young's Modulus | 6595000.0 |
| GXY Shear Modulus | 1367000.0 |
| X Tensile Yield Strength | 119700.0 |
| X Compressive Yield Strength | 35180.0 |
| Y Tensile Yield Strength | 28430.0 |
| Y Compressive Yield Strength | 28560.0 |
| XY Shear Strength | 10640.0 |
| CTEX | -3.37E-07 |
| CTEY | 1.79E-06 |
| Poisson's Ratio vXY | 0.039 |
| Poisson's Ratio vYX | 0.007 |
Calculators
All laminate properties and mechanical calculations are based on Classical Lamination Theory and should be used as a reference only. Rock West Composites does not guarantee these properties or calculations.
Layup Orientation
46400-UHM-UNI Rev NC
| Ply # | Orientation (degrees) | Location |
|---|---|---|
| 1 | 90 | Inside |
| 2 | 0 | ↓ |
| 3 | 90 | |
| 4 | 0 | |
| 5 | 90 | |
| 6 | 0 | Outside |
- 0° fibers maximize bending stiffness and run along the length of the part. Consider bending a tube over your knee.
- 45° fibers maximize torsional stiffness and are typically plied together in an opposing manner, i.e. ±45°. Consider twisting a tube like a vehicle's driveshaft.
- 90° (or "hoop") fibers maximize crushing stiffness and generally assist in overall durability. Consider laying a tube on the ground and stepping on it.