Tube – Fabric – 1.125 x 1.245 x 96 Inch
BLOWOUT
1
-
5
$218.99
6
-
24
$196.79
25
-
49
$186.59
50
+
$169.39
Estimated lead time for quantities greater than what is Available Now is expected to be at least 4 weeks.
If there is an Available Now quantity listed above, it indicates our quantity in stock. Orders placed today for this quantity or less are expected to ship the next business day.
Tube – Fabric – 1.125 x 1.245 x 96 Inch
Features & Benefits
Fabric roll wrapped tubing offers many benefits over uni-directional and even filament wound tubing. That isn't to say it is the best however. Here are a few reasons you may wish to consider fabric roll wrapped tubing for your application.
- Superior machine ability
- Much better durability by reducing the potential extent of fiber breakout if drilled, machined or damaged
- Typical aesthetic associated with carbon fiber products
- Most "fabric" tubes contain a majority 0° plies in the layup allowing for the most effective bending load support. (whereas filament wound tubes cannot achieve angles less than ~7°
Additional Information
| Shape | Round |
|---|---|
| Materials | Standard Modulus Carbon |
| Pattern | 3k 2X2 Twill Weave |
| Color | Black |
| Finish | Cello Wrap Gloss |
| Inside Diameter | 1.125 |
| Outside Diameter | 1.245 |
| Wall Thickness | 0.060 |
| Length | 96 |
| Length (max continuous) | 96.0 |
| Linear Density | 0.147 |
| Volumetric Density | 0.055 |
| Weight | 1.179 |
| Primary Fiber | Tenax UTS50 |
| Primary Resin / Hardener | Eporite EHM32 |
| HTS - Harmonized Tariff Code | 6815.13.0000 |
Engineering Properties
All laminate properties and mechanical calculations are based on Classical Lamination Theory and should be used as a reference only. Rock West Composites does not guarantee these properties or calculations.
| Avg EX Young's Modulus | 1.206E7 |
|---|---|
| Avg EY Young's Modulus | 8290000.0 |
| GXY Shear Modulus | 1125000.0 |
| X Tensile Yield Strength | 92440.0 |
| X Compressive Yield Strength | 115900.0 |
| Y Tensile Yield Strength | 53580.0 |
| Y Compressive Yield Strength | 83770.0 |
| XY Shear Strength | 9589.0 |
| CTEX | 5.18E-07 |
| CTEY | 1.38E-06 |
| Poisson's Ratio vXY | 0.046 |
| Poisson's Ratio vYX | 0.032 |
Note:
- "X" is along the length of a tube, rod, plate, or panel.
- "Y" is around the perimeter of a tube, perpendicular to the length of pultruded parts, or along the width of a plate or panel.
Calculators
All laminate properties and mechanical calculations are based on Classical Lamination Theory and should be used as a reference only. Rock West Composites does not guarantee these properties or calculations.
Layup Orientation
46606-LONG Rev NC
| Ply # | Orientation (degrees) | Location |
|---|---|---|
| 1 | 0 | Inside |
| 2 | 0 | ↓ |
| 3 | 0 | |
| 4 | 90 | |
| 5 | 90 | |
| 6 | 0 | |
| 7 | 0 | |
| 8 | 0 | |
| 9 | 0/90 | Outside |
- 0° fibers maximize bending stiffness and run along the length of the part. Consider bending a tube over your knee.
- 45° fibers maximize torsional stiffness and are typically plied together in an opposing manner, i.e. ±45°. Consider twisting a tube like a vehicle's driveshaft.
- 90° (or "hoop") fibers maximize crushing stiffness and generally assist in overall durability. Consider laying a tube on the ground and stepping on it.
Technical Specifications
|
SKU: TBD1-LONG Rev NC |
||
| Ftu-Lengthwise | ksi | |
| Tension Strength | k-lb | |
| Fcu-Lengthwise | ksi | |
| Compression Strength | k-lb | |
| Flexure Strength | ksi | |
| Internal Pressure | psi | |
| Tension Modulus | Msi | |
| Compression Modulus | Msi | |
*ALL data in this table provided as reference only. Rock West does not guarantee values presented herein and requires that physical testing & validation be performed by purchaser prior to product assembly or use.