Carbon Fiber Plate - High Modulus - Peel Ply - 120" x 38" x 1/8"
Estimated lead time for quantities greater than what is Available Now is expected to be at least 4 weeks.
Click to view and choose plate sizes available
High Performance ♦ Quasi Isotropic ♦ Woven Fiberglass Top & Bottom
Additional Information
| Materials | High Modulus Carbon |
|---|---|
| Pattern | Fiberglass Scrim |
| Color | Black |
| Finish | Matte / Matte |
| Panel Thickness | 0.119000 |
| Width | 38.0 |
| Thickness | 0.12 |
| Length | 120 |
| Weight | 50.0 |
Technical Data
We cannot supply any "CURED" theoretical data at this time. Please refer to the material data sheets below for fiber and the resin specification sheets. That is the only data we can supply at this time.
Carbon Fiber Specification Sheets
- High Modulus - 57msi - HR40 Fiber (used in our 14008-D pre preg)
Resin System Specification Sheets
- Newport 321 (Hi Modulus 14008-D & 14014-D Plain Weave)
- Semi-Toughened
- Qualified for NASA outgassing specifications
Layup Orientation
47631-HM
| Ply # | Orientation (degrees) | Location |
|---|
- 0° fibers maximize bending stiffness and run along the length of the part. Consider bending a tube over your knee.
- 45° fibers maximize torsional stiffness and are typically plied together in an opposing manner, i.e. ±45°. Consider twisting a tube like a vehicle's driveshaft.
- 90° (or "hoop") fibers maximize crushing stiffness and generally assist in overall durability. Consider laying a tube on the ground and stepping on it.