CARBONNect - Angle Connector Kit - Aluminum - For 2.0-inch ID Round Tubing with .06-inch Wall

Don't forget the Drill Jig Kit if this is a first time order!

With this Angle Adapter Connector kit, you can add a 180° connection between two carbon tubes 2" ID. If set at 45° angles, bolts can be added to provide additional strength. Requires tubes with 1/16” wall thickness.

• Use to connect two tubes to form an adjustable joint
• Tighten in any position – 180° adjustability
• Use for truss structures or any structure requiring other than 90° angles

Matching screws with 170,000 PSI tensile strength are provided in the kit.

Allen wrenches not supplied. Don't forget the Drill Jig Kit if this is a first time order!