Tube - Pullbraided - Smooth Matte - 0.787" (20mm) x 0.984" (25mm) x 78.74" (2000mm) - BLOWOUT

productname image number 0
productname image number 1
productname image number 2
productname image number 3
productname image number 4
productname image number 0
productname image number 1
productname image number 2
productname image number 3
productname image number 4
P/N: PBRT-2025

20mm x 25mm x 2000mm - Blowout

P/N: PBRT-2025
1 - 9
$89.99
10 +
$84.89
Contact Info
Project Details
Quantity must be greater than 1.
or
Please select a valid length.
Precision of Measurement
Please select a tolerance option.
    • ~0.005 reduction on outer diameter (OD)."
    • This removes the outer cello wrap gloss finish.
    • Sand outer diameter to specified thickness.
    • Patterns will likely distort in appearance
    Please select a value within the allowed range.
    Sanding Tolerance Options:
    Please select a tolerance option.

If you are requesting bulk discounts, cutting, or standard sanding services only, we will send you a cart with your product selections. You may enter your shipping information and purchase directly at that time. Please note, the cart will not allow edits to the quote. Any changes will have to be completed by our team. If we do not have enough information to complete your quote we will reach out to you directly. If you are requesting additional services or custom sanding, a team member will reach out to you to finalize a quote.

If you request a custom length you will be charged for a full length item (or items if more than 1 is needed to meet your request) plus a cutting fee. You will then be shipped the item sized to your specification and any remaining length of the orginal item (drops). Sanding also incurs a fee which will be included in the quote. All items that have been sanded or cut may not be returned.

Lead time for shipment of this product is estimated to be at least 4 weeks. Large quantity orders may require more time.

Rock West Composites newest product is a blend of pultruded unidirectional tubes with a new process called pullbraiding. If the profile has to withstand stresses in more than one direction, standard pultrusion is not sufficient. So these tubes are manufactured by rotating the fibers during the pultrusion process and then cured. This tube has and ID of 0.787" (20mm) with an OD of 0.984" (25mm) and a length of 78.74" (2000mm)

Quick Facts for 20mm ID Pulbraided Tubing:

Values provided here may vary slightly

  • Fiber:70% Torayca T700 (or equivalent)
  • Resin:30% Epoxy Resin
  • Tolerances: +/-0.002" (0.05mm)
  • Density:>1.65g/cm3
  • Stiffness:>80-120Gpa
  • Bending Strength:500-6550 MPa
  • Tensile Strength:>650Mpa
  • Operating Temperature: -40F to 248F

Features & Benefits

Pullbraided Tubing Features

Additional Information

P/N PBRT-2025
Clearance Yes
Finish Sanded Smooth Matte
HTS - Harmonized Tariff Code 6815.13.0000
Inside Dimension 0.787
Length 78.74
Materials Standard Modulus Carbon
OD 0.984
Outside Dimension 0.984
Tensile Modulus, msi 16.97
Thickness 0.098
Weight 1.23

Technical Data

FIBER DATA SHEET

Fiber may not be controlled so equivalent fibers may be used

Download PDF

Layup Orientation

 

SKU:  PBRT-XXXX Tubing Line-up

[0°nt/90°mt/±45°t] 
±45° bi-axial CF briad
90° unidirectional CF
0° unidirectional CF
 
  • 0° Fibers maximize bending stiffness. Consider bending the tube over your knee.
  • 45° Fibers maximize torsional stiffness. Typically plied together in an opposing manner, i.e. ±45°. Consider twisting the tube like a vehicle's driveshaft.
  • 90° Fibers maximize crushing stiffness and generally assist in overall tube strength. Consider laying the tube on the ground and stepping on it.
Contact Info
Tube - Pullbraided - Smooth Matte - 0.787" (20mm) x 0.984" (25mm) x 78.74" (2000mm) - BLOWOUT
P/N PBRT-2025