Tube - Rectangle - Fabric - Thin Wall - 1.00 x 1.50 - 1.08 x 1.58 - (+Length Options)

No Image found image number 0
No Image found image number 0
P/N: 25506
Available Now: 7
1 - 5
$262.99
6 - 24
$237.79
25 +
$235.59
Estimated lead time for quantities greater than what is Available Now is expected to be between 2 and 4 weeks.

Unlike metals which have similar properties in all directions (isotropic), the properties of composites are varying, dependent on the orientation of the fibers in each layer. 

Roll wrapped tubing is manufactured using multiple layers of pre-preg carbon fiber (and if noted, other) materials. In general each layer is about 0.006 inches thick which means that a tube with a wall thickness of 0.060 inches will typically be composed of 9-10 individual layers of carbon fiber. The number of layers(plys) allows us to vary the orientation of the fibers throughout the thickness, creating a high performance, engineered product.
  • Fabric Tubing has an outer ply of woven material (denoted below as 0°/90°). Typically this outer ply is a 2x2 twill weave (diagonal appearance seen below) but it can also be a plain weave (small checkerboard), spread tow (large format plain weave / checkerboard) or other off-axis weave such as a braid. The core of these tubes are almost always comprised of multi-directional "uni" plies.
  • Uni Tubing is comprised of multi-directional "uni" plies just like the fabric tubes however instead of the outer ply being fabric, it is unidirectional and most typically oriented at 0° (fibers running the length).
  • To learn about our Roll Wrapping Process click here.

*This diagram illustrates a "generic" layup. The SKU being viewed may not have the layup schedule shown in this diagram. To view this SKU's particular layup please check out the "LAYUP ORIENTATION" tab. 

You may also need

Additional Information

P/N 25506
Application General Purpose
Shape Rectangular
Materials Standard Modulus Carbon
Pattern 3k 2X2 Twill Weave
Color Black
Finish Cello Wrap Gloss
Inside Diameter 1.5
Outside Diameter 1.58
Major ID 1.5
Major OD 1.58
Minor ID 1.0
Minor OD 1.08
Inner Corner Radius (approximate) 0.21875
Outer Corner Radius (approximate) 0.25
Length 75
Length (max continuous) 75.0
Linear Density 0.136
Volumetric Density 0.055
Weight 0.851
Primary Fiber Tenax UTS50
Primary Resin / Hardener Eporite EHM32

Technical Data

Radius of Tubing

The inner and external corner radii are measured by hand with a radius gauge with no tolerance called out.
  • Internal Radius: 7/32”
  • External Radius: 1/4”.

We cannot supply theoretical values for this tube at this time. For specification sheets and other data we can supply please review our Technical Spec page.

Tolerances

STOCK TOLERANCE SHEET

Download PDF

Layup Orientation

25506-Group

Ply # Orientation (degrees) Location
  • 0° fibers maximize bending stiffness and run along the length of the part. Consider bending a tube over your knee.
  • 45° fibers maximize torsional stiffness and are typically plied together in an opposing manner, i.e. ±45°. Consider twisting a tube like a vehicle's driveshaft.
  • 90° (or "hoop") fibers maximize crushing stiffness and generally assist in overall durability. Consider laying a tube on the ground and stepping on it.
Contact Info
Tube - Rectangle - Fabric - Thin Wall - 1.00 x 1.50 - 1.08 x 1.58 - (+Length Options)
P/N 25506-Group