TUBE - HEXAGON - 1.00 X 1.10 X 1.968 IN (5 CM LENGTH)
$6.36
Estimated lead time for quantities greater than what is Available Now is expected to be at least 4 weeks.
If there is an Available Now quantity listed above, it indicates our quantity in stock. Orders placed today for this quantity or less are expected to ship the next business day.
Hexagonal cross section tubing offers fabricators and designers alike the ease of affixing motors, accessories and machined features since there is always a flat surface to work with. Offered in a variety of diameters and wall thicknesses one is bound to find a product that will suit your application. And of course, if you don't see what you need, let us know. We can likely build it.
Additional Information
| Application | General Purpose |
|---|---|
| Shape | Hexagonal |
| Materials | Standard Modulus Carbon |
| Pattern | 3k 2X2 Twill Weave |
| Color | Black |
| Finish | Cello Wrap Gloss |
| Inside Diameter | 1.0 |
| Outside Diameter | 1.11 |
| Wall Thickness | 0.055 |
| Inner Corner Radius (approximate) | 0.015625 |
| Outer Corner Radius (approximate) | 0.203125 |
| Length | 1.968 |
| Length (max continuous) | 1.968 |
| Linear Density | 0.132 |
| Volumetric Density | 0.055 |
| Weight | 0.022 |
| Primary Fiber | Tenax UTS50 |
| Primary Resin / Hardener | Eporite EHM32 |
Engineering Properties
All laminate properties and mechanical calculations are based on Classical Lamination Theory and should be used as a reference only. Rock West Composites does not guarantee these properties or calculations.
| Avg EX Young's Modulus | 8301000.0 |
|---|---|
| Avg EY Young's Modulus | 4119000.0 |
| GXY Shear Modulus | 3070000.0 |
| X Tensile Yield Strength | 42810.0 |
| X Compressive Yield Strength | 51100.0 |
| Y Tensile Yield Strength | 20180.0 |
| Y Compressive Yield Strength | 26440.0 |
| XY Shear Strength | 34130.0 |
| CTEX | 9.46E-08 |
| CTEY | 2.72E-06 |
| Poisson's Ratio vXY | 0.461 |
| Poisson's Ratio vYX | 0.229 |
Note:
- "X" is along the length of a tube, rod, plate, or panel.
- "Y" is around the perimeter of a tube, perpendicular to the length of pultruded parts, or along the width of a plate or panel.
Layup Orientation
25600-5CM Rev B
| Ply # | Orientation (degrees) | Location |
|---|---|---|
| 1 | 0 | Inside |
| 2 | 0 | ↓ |
| 3 | 45 | |
| 4 | -45 | |
| 5 | 45 | |
| 6 | -45 | |
| 7 | 0/90 | Outside |
- 0° fibers maximize bending stiffness and run along the length of the part. Consider bending a tube over your knee.
- 45° fibers maximize torsional stiffness and are typically plied together in an opposing manner, i.e. ±45°. Consider twisting a tube like a vehicle's driveshaft.
- 90° (or "hoop") fibers maximize crushing stiffness and generally assist in overall durability. Consider laying a tube on the ground and stepping on it.
Technical Data
Radius of Tubing
The inner and external corner radii are measured by hand with a radius gauge with no tolerance called out.- Internal Radius: 1/64”
- External Radius: 13/64”.
We cannot supply theoretical values for this tube at this time. For specification sheets and other data we can supply please review our Technical Spec page.
Layup Orientation
25600-5CM Rev B
| Ply # | Orientation (degrees) | Location |
|---|---|---|
| 1 | 0 | Inside |
| 2 | 0 | ↓ |
| 3 | 45 | |
| 4 | -45 | |
| 5 | 45 | |
| 6 | -45 | |
| 7 | 0/90 | Outside |
- 0° fibers maximize bending stiffness and run along the length of the part. Consider bending a tube over your knee.
- 45° fibers maximize torsional stiffness and are typically plied together in an opposing manner, i.e. ±45°. Consider twisting a tube like a vehicle's driveshaft.
- 90° (or "hoop") fibers maximize crushing stiffness and generally assist in overall durability. Consider laying a tube on the ground and stepping on it.