Tube - 3k Plain Weave - High Modulus - 0.625 x 0.750 x 72 Inch
*Theoretical values are currently not available for this tube but testing can be performed upon request for a fee
Features & Benefits
Carbon Fiber Material | Modulus, Strength | Benefits, Features & Notes
- Standard Modulus | 34 msi, 700 ksi | Good structural properties - Stiffer than aluminum - Readily available
- Intermediate Modulus | 42 msi, 825 ksi | Great structural properties - Highest strength option - Great balance of stiffness and strength
- High Modulus | 57 msi, 670 ksi | Very stiff - Good thermal conductivity / stability - Typically used in all 0° & 90° (or off-axis) plies throughout the ply sequence / laminate orientation.
- Ultra High Modulus | 94 msi, 414 ksi | Stiffest option available - Great thermal conductivity - Used primarily as 0° plies in combination with lower modulus / higher strength fibers in the 90° orientation to create a well-balanced and functional composite structure.
*Values listed above are reflective only of the fiber NOT the composite matrix (fiber + resin) and are listed only for tensile modulus and strength. ***Theoretical values are currently not available for this tube but testing can be performed upon request for a fee
Additional Information
| Shape | Round |
|---|---|
| Materials | High Modulus Carbon |
| Pattern | 1k Plain Weave |
| Color | Black |
| Finish | Cello Wrap Gloss |
| Inside Diameter | 0.625 |
| Outside Diameter | 0.75 |
| Wall Thickness | 0.063 |
| Length | 72 |
| Length (max continuous) | 72.0 |
| Linear Density | 0.092 |
| Volumetric Density | 0.057 |
| Weight | 0.554 |
| Primary Fiber | Toray M40J |
| Primary Resin / Hardener | Eporite EHM82 |
| HTS - Harmonized Tariff Code | 6815.13.0000 |
Engineering Properties
All laminate properties and mechanical calculations are based on Classical Lamination Theory and should be used as a reference only. Rock West Composites does not guarantee these properties or calculations.
| Avg EX Young's Modulus | 1.954E7 |
|---|---|
| Avg EY Young's Modulus | 1.099E7 |
| GXY Shear Modulus | 1220000.0 |
| X Tensile Yield Strength | 151600.0 |
| X Compressive Yield Strength | 99340.0 |
| Y Tensile Yield Strength | 73010.0 |
| Y Compressive Yield Strength | 63920.0 |
| XY Shear Strength | 11050.0 |
| CTEX | 5.41E-07 |
| CTEY | 1.66E-06 |
| Poisson's Ratio vXY | 0.033 |
| Poisson's Ratio vYX | 0.018 |
- "X" is along the length of a tube, rod, plate, or panel.
- "Y" is around the perimeter of a tube, perpendicular to the length of pultruded parts, or along the width of a plate or panel.
Calculators
All laminate properties and mechanical calculations are based on Classical Lamination Theory and should be used as a reference only. Rock West Composites does not guarantee these properties or calculations.
Layup Orientation
45558-HM Rev B
| Ply # | Orientation (degrees) | Location |
|---|---|---|
| 1 | 0 | Inside |
| 2 | 0 | ↓ |
| 3 | 0 | |
| 4 | 90 | |
| 5 | 90 | |
| 6 | 90 | |
| 7 | 0 | |
| 8 | 0 | |
| 9 | 0 | |
| 10 | 0/90 | Outside |
- 0° fibers maximize bending stiffness and run along the length of the part. Consider bending a tube over your knee.
- 45° fibers maximize torsional stiffness and are typically plied together in an opposing manner, i.e. ±45°. Consider twisting a tube like a vehicle's driveshaft.
- 90° (or "hoop") fibers maximize crushing stiffness and generally assist in overall durability. Consider laying a tube on the ground and stepping on it.
Technical Specifications
We cannot supply theoretical values for this tube at this time. For specification sheets and other data we can supply please review our Technical Spec page.